From: Prathamesh Shete <pshete@xxxxxxxxxx> commit b78870e7f41534cc719c295d1f8809aca93aeeab upstream. Ensure tegra_host member "curr_clk_rate" holds the actual clock rate instead of requested clock rate for proper use during tuning correction algorithm. Actual clk rate may not be the same as the requested clk frequency depending on the parent clock source set. Tuning correction algorithm depends on certain parameters which are sensitive to current clk rate. If the host clk is selected instead of the actual clock rate, tuning correction algorithm may end up applying invalid correction, which could result in errors Fixes: ea8fc5953e8b ("mmc: tegra: update hw tuning process") Signed-off-by: Aniruddha TVS Rao <anrao@xxxxxxxxxx> Signed-off-by: Prathamesh Shete <pshete@xxxxxxxxxx> Acked-by: Adrian Hunter <adrian.hunter@xxxxxxxxx> Acked-by: Thierry Reding <treding@xxxxxxxxxx> Cc: stable@xxxxxxxxxxxxxxx Link: https://lore.kernel.org/r/20221006130622.22900-4-pshete@xxxxxxxxxx Signed-off-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/mmc/host/sdhci-tegra.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/mmc/host/sdhci-tegra.c +++ b/drivers/mmc/host/sdhci-tegra.c @@ -773,7 +773,7 @@ static void tegra_sdhci_set_clock(struct dev_err(dev, "failed to set clk rate to %luHz: %d\n", host_clk, err); - tegra_host->curr_clk_rate = host_clk; + tegra_host->curr_clk_rate = clk_get_rate(pltfm_host->clk); if (tegra_host->ddr_signaling) host->max_clk = host_clk; else