From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
[ Upstream commit 2b14d382ec97ca5b420239ee6e16da390fab476c ]
Use the correct names for scl-gpios and sda-gpios so that the generic
i2c recovery code will find them. While we're here set the
GPIO_OPEN_DRAIN flag on the gpios.
Fixes: b795fadfc46b ("arm64: dts: marvell: Add Armada 98DX2530 SoC and RD-AC5X board")
Signed-off-by: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Gregory CLEMENT <gregory.clement@xxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi b/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi
index 80b44c7df56a..881bf948d1df 100644
--- a/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi
@@ -117,8 +117,8 @@
pinctrl-names = "default", "gpio";
pinctrl-0 = <&i2c0_pins>;
pinctrl-1 = <&i2c0_gpio>;
- scl_gpio = <&gpio0 26 GPIO_ACTIVE_HIGH>;
- sda_gpio = <&gpio0 27 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&gpio0 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio0 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "disabled";
};
@@ -136,8 +136,8 @@
pinctrl-names = "default", "gpio";
pinctrl-0 = <&i2c1_pins>;
pinctrl-1 = <&i2c1_gpio>;
- scl_gpio = <&gpio0 20 GPIO_ACTIVE_HIGH>;
- sda_gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&gpio0 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio0 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "disabled";
};
--
2.35.1
