[PATCH 6.0 058/862] RISC-V: Make port I/O string accessors actually work

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Maciej W. Rozycki <macro@xxxxxxxxxxx>

commit 9cc205e3c17d5716da7ebb7fa0c985555e95d009 upstream.

Fix port I/O string accessors such as `insb', `outsb', etc. which use
the physical PCI port I/O address rather than the corresponding memory
mapping to get at the requested location, which in turn breaks at least
accesses made by our parport driver to a PCIe parallel port such as:

PCI parallel port detected: 1415:c118, I/O at 0x1000(0x1008), IRQ 20
parport0: PC-style at 0x1000 (0x1008), irq 20, using FIFO [PCSPP,TRISTATE,COMPAT,EPP,ECP]

causing a memory access fault:

Unable to handle kernel access to user memory without uaccess routines at virtual address 0000000000001008
Oops [#1]
Modules linked in:
CPU: 1 PID: 350 Comm: cat Not tainted 6.0.0-rc2-00283-g10d4879f9ef0-dirty #23
Hardware name: SiFive HiFive Unmatched A00 (DT)
epc : parport_pc_fifo_write_block_pio+0x266/0x416
 ra : parport_pc_fifo_write_block_pio+0xb4/0x416
epc : ffffffff80542c3e ra : ffffffff80542a8c sp : ffffffd88899fc60
 gp : ffffffff80fa2700 tp : ffffffd882b1e900 t0 : ffffffd883d0b000
 t1 : ffffffffff000002 t2 : 4646393043330a38 s0 : ffffffd88899fcf0
 s1 : 0000000000001000 a0 : 0000000000000010 a1 : 0000000000000000
 a2 : ffffffd883d0a010 a3 : 0000000000000023 a4 : 00000000ffff8fbb
 a5 : ffffffd883d0a001 a6 : 0000000100000000 a7 : ffffffc800000000
 s2 : ffffffffff000002 s3 : ffffffff80d28880 s4 : ffffffff80fa1f50
 s5 : 0000000000001008 s6 : 0000000000000008 s7 : ffffffd883d0a000
 s8 : 0004000000000000 s9 : ffffffff80dc1d80 s10: ffffffd8807e4000
 s11: 0000000000000000 t3 : 00000000000000ff t4 : 393044410a303930
 t5 : 0000000000001000 t6 : 0000000000040000
status: 0000000200000120 badaddr: 0000000000001008 cause: 000000000000000f
[<ffffffff80543212>] parport_pc_compat_write_block_pio+0xfe/0x200
[<ffffffff8053bbc0>] parport_write+0x46/0xf8
[<ffffffff8050530e>] lp_write+0x158/0x2d2
[<ffffffff80185716>] vfs_write+0x8e/0x2c2
[<ffffffff80185a74>] ksys_write+0x52/0xc2
[<ffffffff80185af2>] sys_write+0xe/0x16
[<ffffffff80003770>] ret_from_syscall+0x0/0x2
---[ end trace 0000000000000000 ]---

For simplicity address the problem by adding PCI_IOBASE to the physical
address requested in the respective wrapper macros only, observing that
the raw accessors such as `__insb', `__outsb', etc. are not supposed to
be used other than by said macros.  Remove the cast to `long' that is no
longer needed on `addr' now that it is used as an offset from PCI_IOBASE
and add parentheses around `addr' needed for predictable evaluation in
macro expansion.  No need to make said adjustments in separate changes
given that current code is gravely broken and does not ever work.

Signed-off-by: Maciej W. Rozycki <macro@xxxxxxxxxxx>
Fixes: fab957c11efe2 ("RISC-V: Atomic and Locking Code")
Cc: stable@xxxxxxxxxxxxxxx # v4.15+
Reviewed-by: Arnd Bergmann <arnd@xxxxxxxx>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2209220223080.29493@xxxxxxxxxxxxxxxxx
Signed-off-by: Palmer Dabbelt <palmer@xxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
 arch/riscv/include/asm/io.h |   16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

--- a/arch/riscv/include/asm/io.h
+++ b/arch/riscv/include/asm/io.h
@@ -101,9 +101,9 @@ __io_reads_ins(reads, u32, l, __io_br(),
 __io_reads_ins(ins,  u8, b, __io_pbr(), __io_par(addr))
 __io_reads_ins(ins, u16, w, __io_pbr(), __io_par(addr))
 __io_reads_ins(ins, u32, l, __io_pbr(), __io_par(addr))
-#define insb(addr, buffer, count) __insb((void __iomem *)(long)addr, buffer, count)
-#define insw(addr, buffer, count) __insw((void __iomem *)(long)addr, buffer, count)
-#define insl(addr, buffer, count) __insl((void __iomem *)(long)addr, buffer, count)
+#define insb(addr, buffer, count) __insb(PCI_IOBASE + (addr), buffer, count)
+#define insw(addr, buffer, count) __insw(PCI_IOBASE + (addr), buffer, count)
+#define insl(addr, buffer, count) __insl(PCI_IOBASE + (addr), buffer, count)
 
 __io_writes_outs(writes,  u8, b, __io_bw(), __io_aw())
 __io_writes_outs(writes, u16, w, __io_bw(), __io_aw())
@@ -115,22 +115,22 @@ __io_writes_outs(writes, u32, l, __io_bw
 __io_writes_outs(outs,  u8, b, __io_pbw(), __io_paw())
 __io_writes_outs(outs, u16, w, __io_pbw(), __io_paw())
 __io_writes_outs(outs, u32, l, __io_pbw(), __io_paw())
-#define outsb(addr, buffer, count) __outsb((void __iomem *)(long)addr, buffer, count)
-#define outsw(addr, buffer, count) __outsw((void __iomem *)(long)addr, buffer, count)
-#define outsl(addr, buffer, count) __outsl((void __iomem *)(long)addr, buffer, count)
+#define outsb(addr, buffer, count) __outsb(PCI_IOBASE + (addr), buffer, count)
+#define outsw(addr, buffer, count) __outsw(PCI_IOBASE + (addr), buffer, count)
+#define outsl(addr, buffer, count) __outsl(PCI_IOBASE + (addr), buffer, count)
 
 #ifdef CONFIG_64BIT
 __io_reads_ins(reads, u64, q, __io_br(), __io_ar(addr))
 #define readsq(addr, buffer, count) __readsq(addr, buffer, count)
 
 __io_reads_ins(ins, u64, q, __io_pbr(), __io_par(addr))
-#define insq(addr, buffer, count) __insq((void __iomem *)addr, buffer, count)
+#define insq(addr, buffer, count) __insq(PCI_IOBASE + (addr), buffer, count)
 
 __io_writes_outs(writes, u64, q, __io_bw(), __io_aw())
 #define writesq(addr, buffer, count) __writesq(addr, buffer, count)
 
 __io_writes_outs(outs, u64, q, __io_pbr(), __io_paw())
-#define outsq(addr, buffer, count) __outsq((void __iomem *)addr, buffer, count)
+#define outsq(addr, buffer, count) __outsq(PCI_IOBASE + (addr), buffer, count)
 #endif
 
 #include <asm-generic/io.h>





[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux