FAILED: patch "[PATCH] media: cedrus: Fix watchdog race condition" failed to apply to 5.19-stable tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The patch below does not apply to the 5.19-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@xxxxxxxxxxxxxxx>.

Possible dependencies:

fe8b81fde69a ("media: cedrus: Fix watchdog race condition")
4af46bcc4915 ("media: cedrus: Add error handling for failed setup")
f1a413902aa7 ("media: cedrus: h265: Fix logic for not low delay flag")
104a70e1d0bc ("media: cedrus: h265: Fix flag name")

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

>From fe8b81fde69acfcbb5af9e85328e5b9549999fdb Mon Sep 17 00:00:00 2001
From: Nicolas Dufresne <nicolas.dufresne@xxxxxxxxxxxxx>
Date: Thu, 18 Aug 2022 22:33:06 +0200
Subject: [PATCH] media: cedrus: Fix watchdog race condition

The watchdog needs to be scheduled before we trigger the decode
operation, otherwise there is a risk that the decoder IRQ will be
called before we have schedule the watchdog. As a side effect, the
watchdog would never be cancelled and its function would be called
at an inappropriate time.

This was observed while running Fluster with GStreamer as a backend.
Some programming error would cause the decoder IRQ to be call very
quickly after the trigger. Later calls into the driver would deadlock
due to the unbalanced state.

Cc: stable@xxxxxxxxxxxxxxx
Fixes: 7c38a551bda1 ("media: cedrus: Add watchdog for job completion")
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@xxxxxxxxxxxxx>
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@xxxxxxxxxxx>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xxxxxxxxx>
Signed-off-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>

diff --git a/drivers/staging/media/sunxi/cedrus/cedrus_dec.c b/drivers/staging/media/sunxi/cedrus/cedrus_dec.c
index 3b6aa78a2985..e7f7602a5ab4 100644
--- a/drivers/staging/media/sunxi/cedrus/cedrus_dec.c
+++ b/drivers/staging/media/sunxi/cedrus/cedrus_dec.c
@@ -106,11 +106,11 @@ void cedrus_device_run(void *priv)
 
 	/* Trigger decoding if setup went well, bail out otherwise. */
 	if (!error) {
-		dev->dec_ops[ctx->current_codec]->trigger(ctx);
-
 		/* Start the watchdog timer. */
 		schedule_delayed_work(&dev->watchdog_work,
 				      msecs_to_jiffies(2000));
+
+		dev->dec_ops[ctx->current_codec]->trigger(ctx);
 	} else {
 		v4l2_m2m_buf_done_and_job_finish(ctx->dev->m2m_dev,
 						 ctx->fh.m2m_ctx,




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux