For G200_SE_A, PLL M setting is wrong, which leads to blank screen,
or "signal out of range" on VGA display.
previous code had "m |= 0x80" which was changed to
m |= ((pixpllcn & BIT(8)) >> 1);
Tested on G200_SE_A rev 42
This line of code was moved to another file with
commit 85397f6bc4ff ("drm/mgag200: Initialize each model in separate
function") but can be easily backported before this commit.
Fixes: 2dd040946ecf ("drm/mgag200: Store values (not bits) in struct mgag200_pll_values")
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Jocelyn Falempe <jfalempe@xxxxxxxxxx>
---
drivers/gpu/drm/mgag200/mgag200_g200se.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/mgag200/mgag200_g200se.c b/drivers/gpu/drm/mgag200/mgag200_g200se.c
index be389ed91cbd..4ec035029b8b 100644
--- a/drivers/gpu/drm/mgag200/mgag200_g200se.c
+++ b/drivers/gpu/drm/mgag200/mgag200_g200se.c
@@ -284,7 +284,7 @@ static void mgag200_g200se_04_pixpllc_atomic_update(struct drm_crtc *crtc,
pixpllcp = pixpllc->p - 1;
pixpllcs = pixpllc->s;
- xpixpllcm = pixpllcm | ((pixpllcn & BIT(8)) >> 1);
+ xpixpllcm = pixpllcm | BIT(7);
xpixpllcn = pixpllcn;
xpixpllcp = (pixpllcs << 3) | pixpllcp;
--
2.37.3
