Re: [PATCH v2 2/6] arm64: dts: qcom: sdm845-db845c: correct SPI2 pins drive strength

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 10/10/2022 13:44, Krzysztof Kozlowski wrote:
The pin configuration (done with generic pin controller helpers and
as expressed by bindings) requires children nodes with either:
1. "pins" property and the actual configuration,
2. another set of nodes with above point.

The qup_spi2_default pin configuration uses alreaady the second method
with a "pinmux" child, so configure drive-strength similarly in
"pinconf".  Otherwise the PIN drive strength would not be applied.

Fixes: 8d23a0040475 ("arm64: dts: qcom: db845c: add Low speed expansion i2c and spi nodes")
Cc: <stable@xxxxxxxxxxxxxxx>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>

---

Not tested on hardware.

Changes since v1:
1. Put it under pinconf instead of pinmux, as suggested by Doug.
---

<snip>

Reviewed-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>



[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux