Hi On 06-10-2022 04:12, Thinh Nguyen wrote:
On Wed, Oct 05, 2022, Ferry Toth wrote:Hi, Thanks! Does the failure only happen the first time host is initialized? Or can it recover after switching to device then back to host mode? I can switch back and forth and device mode works each time, host mode remains dead.Ok.Probably the failure happens if some step(s) in dwc3_core_init() hasn't completed. tusb1210 is a phy driver right? The issue is probably because we didn't initialize the phy yet. So, I suspect placing dwc3_get_extcon() after initializing the phy will probably solve the dependency problem. You can try something for yourself or I can provide something to test later if you don't mind (maybe next week if it's ok). Yes, the code move I mentioned above "moves dwc3_get_extcon() until after dwc3_core_init() but just before dwc3_core_init_mode(). AFAIU initially dwc3_get_extcon() was called from within dwc3_core_init_mode() but only for case USB_DR_MODE_OTG. So with this change order of events is more or less unchanged" solves the issue.I saw the experiment you did from the link you provided. We want to also confirm exactly which step in dwc3_core_init() was needed.
Ok. I first tried the code move suggested by Andrey (didn't work). Then after reading the actual code I moved a bit further.
This move was on top of -rc6 without any reverts. I did not make additional changes to dwc3_core_init()
So current v6.0 has: dwc3_get_extcon - dwc3_get_dr_mode - ... - dwc3_core_init - .. - dwc3_core_init_mode (not working)
I changed to: dwc3_get_dr_mode - dwc3_get_extcon - .. - dwc3_core_init - .. - dwc3_core_init_mode (no change)
Then to: dwc3_get_dr_mode - .. - dwc3_core_init - .. - dwc3_get_extcon - dwc3_core_init_mode (works)
.. are what I believe for this issue irrelevant calls to dwc3_alloc_scratch_buffers, dwc3_check_params and dwc3_debugfs_init.
Thanks, Thinh
