From: Alexander Couzens <lynxis@xxxxxxx>
commit 42bc4fafe359ed6b73602b7a2dba0dd99588f8ce upstream.
Move the PLL init of the switch out of the pad configuration of the port
6 (usally cpu port).
Fix a unidirectional 100 mbit limitation on 1 gbit or 2.5 gbit links for
outbound traffic on port 5 or port 6.
Fixes: c288575f7810 ("net: dsa: mt7530: Add the support of MT7531 switch")
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Alexander Couzens <lynxis@xxxxxxx>
Signed-off-by: Jakub Kicinski <kuba@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/net/dsa/mt7530.c | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -501,14 +501,19 @@ static bool mt7531_dual_sgmii_supported(
static int
mt7531_pad_setup(struct dsa_switch *ds, phy_interface_t interface)
{
- struct mt7530_priv *priv = ds->priv;
+ return 0;
+}
+
+static void
+mt7531_pll_setup(struct mt7530_priv *priv)
+{
u32 top_sig;
u32 hwstrap;
u32 xtal;
u32 val;
if (mt7531_dual_sgmii_supported(priv))
- return 0;
+ return;
val = mt7530_read(priv, MT7531_CREV);
top_sig = mt7530_read(priv, MT7531_TOP_SIG_SR);
@@ -587,8 +592,6 @@ mt7531_pad_setup(struct dsa_switch *ds,
val |= EN_COREPLL;
mt7530_write(priv, MT7531_PLLGP_EN, val);
usleep_range(25, 35);
-
- return 0;
}
static void
@@ -2292,6 +2295,8 @@ mt7531_setup(struct dsa_switch *ds)
SYS_CTRL_PHY_RST | SYS_CTRL_SW_RST |
SYS_CTRL_REG_RST);
+ mt7531_pll_setup(priv);
+
if (mt7531_dual_sgmii_supported(priv)) {
priv->p5_intf_sel = P5_INTF_SEL_GMAC5_SGMII;
@@ -2867,8 +2872,6 @@ mt7531_cpu_port_config(struct dsa_switch
case 6:
interface = PHY_INTERFACE_MODE_2500BASEX;
- mt7531_pad_setup(ds, interface);
-
priv->p6_interface = interface;
break;
default:
