From: Takashi Iwai <tiwai@xxxxxxx>
commit 79764ec772bc1346441ae1c4b1f3bd1991d634e8 upstream.
This reverts commit ff878b408a03bef5d610b7e2302702e16a53636e.
Unfortunately the recent fix seems bringing another regressions with
PulseAudio / pipewire, at least for Steinberg and MOTU devices.
As a temporary solution, do a straight revert. The issue for Android
will be revisited again later by another different fix (if any).
Fixes: ff878b408a03 ("ALSA: usb-audio: Split endpoint setups for hw_params and prepare")
Cc: <stable@xxxxxxxxxxxxxxx>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=216500
Link: https://lore.kernel.org/r/20220920113929.25162-1-tiwai@xxxxxxx
Signed-off-by: Takashi Iwai <tiwai@xxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
sound/usb/endpoint.c | 23 ++++++++++++++---------
sound/usb/endpoint.h | 6 ++----
sound/usb/pcm.c | 14 ++++----------
3 files changed, 20 insertions(+), 23 deletions(-)
--- a/sound/usb/endpoint.c
+++ b/sound/usb/endpoint.c
@@ -758,8 +758,7 @@ bool snd_usb_endpoint_compatible(struct
* The endpoint needs to be closed via snd_usb_endpoint_close() later.
*
* Note that this function doesn't configure the endpoint. The substream
- * needs to set it up later via snd_usb_endpoint_set_params() and
- * snd_usb_endpoint_prepare().
+ * needs to set it up later via snd_usb_endpoint_configure().
*/
struct snd_usb_endpoint *
snd_usb_endpoint_open(struct snd_usb_audio *chip,
@@ -1293,13 +1292,12 @@ out_of_memory:
/*
* snd_usb_endpoint_set_params: configure an snd_usb_endpoint
*
- * It's called either from hw_params callback.
* Determine the number of URBs to be used on this endpoint.
* An endpoint must be configured before it can be started.
* An endpoint that is already running can not be reconfigured.
*/
-int snd_usb_endpoint_set_params(struct snd_usb_audio *chip,
- struct snd_usb_endpoint *ep)
+static int snd_usb_endpoint_set_params(struct snd_usb_audio *chip,
+ struct snd_usb_endpoint *ep)
{
const struct audioformat *fmt = ep->cur_audiofmt;
int err;
@@ -1382,18 +1380,18 @@ static int init_sample_rate(struct snd_u
}
/*
- * snd_usb_endpoint_prepare: Prepare the endpoint
+ * snd_usb_endpoint_configure: Configure the endpoint
*
* This function sets up the EP to be fully usable state.
- * It's called either from prepare callback.
+ * It's called either from hw_params or prepare callback.
* The function checks need_setup flag, and performs nothing unless needed,
* so it's safe to call this multiple times.
*
* This returns zero if unchanged, 1 if the configuration has changed,
* or a negative error code.
*/
-int snd_usb_endpoint_prepare(struct snd_usb_audio *chip,
- struct snd_usb_endpoint *ep)
+int snd_usb_endpoint_configure(struct snd_usb_audio *chip,
+ struct snd_usb_endpoint *ep)
{
bool iface_first;
int err = 0;
@@ -1414,6 +1412,9 @@ int snd_usb_endpoint_prepare(struct snd_
if (err < 0)
goto unlock;
}
+ err = snd_usb_endpoint_set_params(chip, ep);
+ if (err < 0)
+ goto unlock;
goto done;
}
@@ -1441,6 +1442,10 @@ int snd_usb_endpoint_prepare(struct snd_
if (err < 0)
goto unlock;
+ err = snd_usb_endpoint_set_params(chip, ep);
+ if (err < 0)
+ goto unlock;
+
err = snd_usb_select_mode_quirk(chip, ep->cur_audiofmt);
if (err < 0)
goto unlock;
--- a/sound/usb/endpoint.h
+++ b/sound/usb/endpoint.h
@@ -17,10 +17,8 @@ snd_usb_endpoint_open(struct snd_usb_aud
bool is_sync_ep);
void snd_usb_endpoint_close(struct snd_usb_audio *chip,
struct snd_usb_endpoint *ep);
-int snd_usb_endpoint_set_params(struct snd_usb_audio *chip,
- struct snd_usb_endpoint *ep);
-int snd_usb_endpoint_prepare(struct snd_usb_audio *chip,
- struct snd_usb_endpoint *ep);
+int snd_usb_endpoint_configure(struct snd_usb_audio *chip,
+ struct snd_usb_endpoint *ep);
int snd_usb_endpoint_get_clock_rate(struct snd_usb_audio *chip, int clock);
bool snd_usb_endpoint_compatible(struct snd_usb_audio *chip,
--- a/sound/usb/pcm.c
+++ b/sound/usb/pcm.c
@@ -443,17 +443,17 @@ static int configure_endpoints(struct sn
if (stop_endpoints(subs, false))
sync_pending_stops(subs);
if (subs->sync_endpoint) {
- err = snd_usb_endpoint_prepare(chip, subs->sync_endpoint);
+ err = snd_usb_endpoint_configure(chip, subs->sync_endpoint);
if (err < 0)
return err;
}
- err = snd_usb_endpoint_prepare(chip, subs->data_endpoint);
+ err = snd_usb_endpoint_configure(chip, subs->data_endpoint);
if (err < 0)
return err;
snd_usb_set_format_quirk(subs, subs->cur_audiofmt);
} else {
if (subs->sync_endpoint) {
- err = snd_usb_endpoint_prepare(chip, subs->sync_endpoint);
+ err = snd_usb_endpoint_configure(chip, subs->sync_endpoint);
if (err < 0)
return err;
}
@@ -551,13 +551,7 @@ static int snd_usb_hw_params(struct snd_
subs->cur_audiofmt = fmt;
mutex_unlock(&chip->mutex);
- if (subs->sync_endpoint) {
- ret = snd_usb_endpoint_set_params(chip, subs->sync_endpoint);
- if (ret < 0)
- goto unlock;
- }
-
- ret = snd_usb_endpoint_set_params(chip, subs->data_endpoint);
+ ret = configure_endpoints(chip, subs);
unlock:
if (ret < 0)
