[PATCH 5.15 24/45] drm/amdgpu: move nbio sdma_doorbell_range() into sdma code for vega

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Alex Deucher <alexander.deucher@xxxxxxx>

commit e3163bc8ffdfdb405e10530b140135b2ee487f89 upstream.

This mirrors what we do for other asics and this way we are
sure the sdma doorbell range is properly initialized.

There is a comment about the way doorbells on gfx9 work that
requires that they are initialized for other IPs before GFX
is initialized.  However, the statement says that it applies to
multimedia as well, but the VCN code currently initializes
doorbells after GFX and there are no known issues there.  In my
testing at least I don't see any problems on SDMA.

This is a prerequisite for fixing the Unsupported Request error
reported through AER during driver load.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=216373

The error was unnoticed before and got visible because of the commit
referenced below. This doesn't fix anything in the commit below, rather
fixes the issue in amdgpu exposed by the commit. The reference is only
to associate this commit with below one so that both go together.

Fixes: 8795e182b02d ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()")

Acked-by: Christian König <christian.koenig@xxxxxxx>
Reviewed-by: Lijo Lazar <lijo.lazar@xxxxxxx>
Signed-off-by: Alex Deucher <alexander.deucher@xxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
 drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c |    5 +++++
 drivers/gpu/drm/amd/amdgpu/soc15.c     |   22 ----------------------
 2 files changed, 5 insertions(+), 22 deletions(-)

--- a/drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c
@@ -1507,6 +1507,11 @@ static int sdma_v4_0_start(struct amdgpu
 		WREG32_SDMA(i, mmSDMA0_CNTL, temp);
 
 		if (!amdgpu_sriov_vf(adev)) {
+			ring = &adev->sdma.instance[i].ring;
+			adev->nbio.funcs->sdma_doorbell_range(adev, i,
+				ring->use_doorbell, ring->doorbell_index,
+				adev->doorbell_index.sdma_doorbell_range);
+
 			/* unhalt engine */
 			temp = RREG32_SDMA(i, mmSDMA0_F32_CNTL);
 			temp = REG_SET_FIELD(temp, SDMA0_F32_CNTL, HALT, 0);
--- a/drivers/gpu/drm/amd/amdgpu/soc15.c
+++ b/drivers/gpu/drm/amd/amdgpu/soc15.c
@@ -1416,22 +1416,6 @@ static int soc15_common_sw_fini(void *ha
 	return 0;
 }
 
-static void soc15_doorbell_range_init(struct amdgpu_device *adev)
-{
-	int i;
-	struct amdgpu_ring *ring;
-
-	/* sdma/ih doorbell range are programed by hypervisor */
-	if (!amdgpu_sriov_vf(adev)) {
-		for (i = 0; i < adev->sdma.num_instances; i++) {
-			ring = &adev->sdma.instance[i].ring;
-			adev->nbio.funcs->sdma_doorbell_range(adev, i,
-				ring->use_doorbell, ring->doorbell_index,
-				adev->doorbell_index.sdma_doorbell_range);
-		}
-	}
-}
-
 static int soc15_common_hw_init(void *handle)
 {
 	struct amdgpu_device *adev = (struct amdgpu_device *)handle;
@@ -1451,12 +1435,6 @@ static int soc15_common_hw_init(void *ha
 
 	/* enable the doorbell aperture */
 	soc15_enable_doorbell_aperture(adev, true);
-	/* HW doorbell routing policy: doorbell writing not
-	 * in SDMA/IH/MM/ACV range will be routed to CP. So
-	 * we need to init SDMA/IH/MM/ACV doorbell range prior
-	 * to CP ip block init and ring test.
-	 */
-	soc15_doorbell_range_init(adev);
 
 	return 0;
 }





[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux