From: Johan Hovold <johan@xxxxxxxxxx> commit 8e83622ae7ca481c76c8fd9579877f6abae64ca2 upstream. Disable LCR updates for pre-0x30 devices which use a different (unknown) protocol for line control and where the current register write causes the next received character to be lost. Note that updating LCR using the INIT command has no effect on these devices either. Reported-by: Jonathan Woithe <jwoithe@xxxxxxxxxx> Tested-by: Jonathan Woithe <jwoithe@xxxxxxxxxx> Link: https://lore.kernel.org/r/Ys1iPTfiZRWj2gXs@xxxxxxxxxxxxxxxxxxx Fixes: 4e46c410e050 ("USB: serial: ch341: reinitialize chip on reconfiguration") Fixes: 55fa15b5987d ("USB: serial: ch341: fix baud rate and line-control handling") Cc: stable@xxxxxxxxxxxxxxx # 4.10 Signed-off-by: Johan Hovold <johan@xxxxxxxxxx> [ johan: adjust context to 4.19 ] Signed-off-by: Johan Hovold <johan@xxxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/usb/serial/ch341.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) --- a/drivers/usb/serial/ch341.c +++ b/drivers/usb/serial/ch341.c @@ -96,6 +96,8 @@ struct ch341_private { u8 mcr; u8 msr; u8 lcr; + + u8 version; }; static void ch341_set_termios(struct tty_struct *tty, @@ -181,6 +183,9 @@ static int ch341_set_baudrate_lcr(struct if (r) return r; + if (priv->version < 0x30) + return 0; + r = ch341_control_out(dev, CH341_REQ_WRITE_REG, 0x2518, lcr); if (r) return r; @@ -232,7 +237,9 @@ static int ch341_configure(struct usb_de r = ch341_control_in(dev, CH341_REQ_READ_VERSION, 0, 0, buffer, size); if (r < 0) goto out; - dev_dbg(&dev->dev, "Chip version: 0x%02x\n", buffer[0]); + + priv->version = buffer[0]; + dev_dbg(&dev->dev, "Chip version: 0x%02x\n", priv->version); r = ch341_control_out(dev, CH341_REQ_SERIAL_INIT, 0, 0); if (r < 0)
