From: Yan Xinyu <sdlyyxy@xxxxxxxxxxx> commit 8d5fc280392735e4441b35de14f2f4860fa8d83c upstream. Add support for OPPO R11 USB diag serial port to option driver. This phone uses Qualcomm Snapdragon 660 SoC. usb-devices output: T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 10 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=22d9 ProdID=276c Rev=04.04 S: Manufacturer=OPPO S: Product=SDM660-MTP _SN:09C6BCA7 S: SerialNumber=beb2c403 C: #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option I: If#=0x1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs Signed-off-by: Yan Xinyu <sdlyyxy@xxxxxxxxxxx> Link: https://lore.kernel.org/r/20220714102037.4113889-1-sdlyyxy@xxxxxxxxxxx Link: https://lore.kernel.org/r/Yt1WfSZk03Plpnan@xxxxxxxxxxxxxxxxxxxx Cc: stable@xxxxxxxxxxxxxxx Signed-off-by: Johan Hovold <johan@xxxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/usb/serial/option.c | 5 +++++ 1 file changed, 5 insertions(+) --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -576,6 +576,10 @@ static void option_instat_callback(struc #define WETELECOM_PRODUCT_6802 0x6802 #define WETELECOM_PRODUCT_WMD300 0x6803 +/* OPPO products */ +#define OPPO_VENDOR_ID 0x22d9 +#define OPPO_PRODUCT_R11 0x276c + /* Device flags */ @@ -2157,6 +2161,7 @@ static const struct usb_device_id option { USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1404, 0xff) }, /* GosunCn GM500 RNDIS */ { USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1405, 0xff) }, /* GosunCn GM500 MBIM */ { USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1406, 0xff) }, /* GosunCn GM500 ECM/NCM */ + { USB_DEVICE_AND_INTERFACE_INFO(OPPO_VENDOR_ID, OPPO_PRODUCT_R11, 0xff, 0xff, 0x30) }, { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, option_ids);
