From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> commit 672d6ca758651f0ec12cd0d59787067a5bde1c96 upstream. A lot of modern laptops use the Parade PS8461E MUX for eDP switching. The MUX can operate in jitter cleaning mode or redriver mode, the first one resulting in higher link quality. The jitter cleaning mode needs to know the link rate used and the MUX achieves this by snooping the LINK_BW_SET, LINK_RATE_SELECT and SUPPORTED_LINK_RATES DPCD accesses. When the MUX is powered down (seems this can happen whenever the display is turned off) it loses track of the snooped link rates so when we do the LINK_RATE_SELECT write it no longer knowns which link rate we're selecting, and thus it falls back to the lower quality redriver mode. This results in unstable high link rates (eg. usually 8.1Gbps link rate no longer works correctly). In order to avoid all that let's re-snoop SUPPORTED_LINK_RATES from the sink at the start of every link training. Unfortunately we don't have a way to detect the presence of the MUX. It looks like the set of laptops equipped with this MUX is fairly large and contains devices from multiple manufacturers. It may also still be growing with new models. So a quirk doesn't seem like a very easily maintainable option, thus we shall attempt to do this unconditionally on all machines that use LINK_RATE_SELECT. Hopefully this extra DPCD read doesn't cause issues for any unaffected machine. If that turns out to be the case we'll need to convert this into a quirk in the future. Cc: stable@xxxxxxxxxxxxxxx Cc: Jason A. Donenfeld <Jason@xxxxxxxxx> Cc: Ankit Nautiyal <ankit.k.nautiyal@xxxxxxxxx> Cc: Jani Nikula <jani.nikula@xxxxxxxxx> Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6205 Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> Link: https://patchwork.freedesktop.org/patch/msgid/20220902070319.15395-1-ville.syrjala@xxxxxxxxxxxxxxx Tested-by: Aaron Ma <aaron.ma@xxxxxxxxxxxxx> Tested-by: Jason A. Donenfeld <Jason@xxxxxxxxx> Reviewed-by: Jani Nikula <jani.nikula@xxxxxxxxx> (cherry picked from commit 25899c590cb5ba9b9f284c6ca8e7e9086793d641) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/gpu/drm/i915/display/intel_dp_link_training.c | 22 ++++++++++++++++++ 1 file changed, 22 insertions(+) --- a/drivers/gpu/drm/i915/display/intel_dp_link_training.c +++ b/drivers/gpu/drm/i915/display/intel_dp_link_training.c @@ -163,6 +163,28 @@ intel_dp_link_training_clock_recovery(st intel_dp_compute_rate(intel_dp, intel_dp->link_rate, &link_bw, &rate_select); + /* + * WaEdpLinkRateDataReload + * + * Parade PS8461E MUX (used on varius TGL+ laptops) needs + * to snoop the link rates reported by the sink when we + * use LINK_RATE_SET in order to operate in jitter cleaning + * mode (as opposed to redriver mode). Unfortunately it + * loses track of the snooped link rates when powered down, + * so we need to make it re-snoop often. Without this high + * link rates are not stable. + */ + if (!link_bw) { + struct intel_connector *connector = intel_dp->attached_connector; + __le16 sink_rates[DP_MAX_SUPPORTED_RATES]; + + drm_dbg_kms(&i915->drm, "[CONNECTOR:%d:%s] Reloading eDP link rates\n", + connector->base.base.id, connector->base.name); + + drm_dp_dpcd_read(&intel_dp->aux, DP_SUPPORTED_LINK_RATES, + sink_rates, sizeof(sink_rates)); + } + if (link_bw) drm_dbg_kms(&i915->drm, "Using LINK_BW_SET value %02x\n", link_bw);
