From: Pablo Sun <pablo.sun@xxxxxxxxxxxx>
commit c1e5c2f0cb8a22ec2e14af92afc7006491bebabb upstream.
Fix incorrect pin assignment values when connecting to a monitor with
Type-C receptacle instead of a plug.
According to specification, an UFP_D receptacle's pin assignment
should came from the UFP_D pin assignments field (bit 23:16), while
an UFP_D plug's assignments are described in the DFP_D pin assignments
(bit 15:8) during Mode Discovery.
For example the LG 27 UL850-W is a monitor with Type-C receptacle.
The monitor responds to MODE DISCOVERY command with following
DisplayPort Capability flag:
dp->alt->vdo=0x140045
The existing logic only take cares of UPF_D plug case,
and would take the bit 15:8 for this 0x140045 case.
This results in an non-existing pin assignment 0x0 in
dp_altmode_configure.
To fix this problem a new set of macros are introduced
to take plug/receptacle differences into consideration.
Fixes: 0e3bb7d6894d ("usb: typec: Add driver for DisplayPort alternate mode")
Cc: stable@xxxxxxxxxxxxxxx
Co-developed-by: Pablo Sun <pablo.sun@xxxxxxxxxxxx>
Co-developed-by: Macpaul Lin <macpaul.lin@xxxxxxxxxxxx>
Reviewed-by: Guillaume Ranquet <granquet@xxxxxxxxxxxx>
Reviewed-by: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
Signed-off-by: Pablo Sun <pablo.sun@xxxxxxxxxxxx>
Signed-off-by: Macpaul Lin <macpaul.lin@xxxxxxxxxxxx>
Link: https://lore.kernel.org/r/20220804034803.19486-1-macpaul.lin@xxxxxxxxxxxx
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/usb/typec/altmodes/displayport.c | 4 ++--
include/linux/usb/typec_dp.h | 5 +++++
2 files changed, 7 insertions(+), 2 deletions(-)
--- a/drivers/usb/typec/altmodes/displayport.c
+++ b/drivers/usb/typec/altmodes/displayport.c
@@ -87,8 +87,8 @@ static int dp_altmode_configure(struct d
case DP_STATUS_CON_UFP_D:
case DP_STATUS_CON_BOTH: /* NOTE: First acting as DP source */
conf |= DP_CONF_UFP_U_AS_UFP_D;
- pin_assign = DP_CAP_DFP_D_PIN_ASSIGN(dp->alt->vdo) &
- DP_CAP_UFP_D_PIN_ASSIGN(dp->port->vdo);
+ pin_assign = DP_CAP_PIN_ASSIGN_UFP_D(dp->alt->vdo) &
+ DP_CAP_PIN_ASSIGN_DFP_D(dp->port->vdo);
break;
default:
break;
--- a/include/linux/usb/typec_dp.h
+++ b/include/linux/usb/typec_dp.h
@@ -73,6 +73,11 @@ enum {
#define DP_CAP_USB BIT(7)
#define DP_CAP_DFP_D_PIN_ASSIGN(_cap_) (((_cap_) & GENMASK(15, 8)) >> 8)
#define DP_CAP_UFP_D_PIN_ASSIGN(_cap_) (((_cap_) & GENMASK(23, 16)) >> 16)
+/* Get pin assignment taking plug & receptacle into consideration */
+#define DP_CAP_PIN_ASSIGN_UFP_D(_cap_) ((_cap_ & DP_CAP_RECEPTACLE) ? \
+ DP_CAP_UFP_D_PIN_ASSIGN(_cap_) : DP_CAP_DFP_D_PIN_ASSIGN(_cap_))
+#define DP_CAP_PIN_ASSIGN_DFP_D(_cap_) ((_cap_ & DP_CAP_RECEPTACLE) ? \
+ DP_CAP_DFP_D_PIN_ASSIGN(_cap_) : DP_CAP_UFP_D_PIN_ASSIGN(_cap_))
/* DisplayPort Status Update VDO bits */
#define DP_STATUS_CONNECTION(_status_) ((_status_) & 3)
