From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
[ Upstream commit a02875c4cbd6f3d2f33d70cc158a19ef02d4b84f ]
It has been discovered that on some parts, from time to time, self-refresh
procedure doesn't work as expected. Debugging and investigating it proved
that disabling AC DLL introduce glitches in RAM controllers which
leads to unexpected behavior. This is confirmed as a hardware bug. DLL
bypass disables 3 DLLs: 2 DX DLLs and AC DLL. Thus, keep only DX DLLs
disabled. This introduce 6mA extra current consumption on VDDCORE when
switching to any ULP mode or standby mode but the self-refresh procedure
still works.
Fixes: f0bbf17958e8 ("ARM: at91: pm: add self-refresh support for sama7g5")
Suggested-by: Frederic Schumacher <frederic.schumacher@xxxxxxxxxxxxx>
Signed-off-by: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
Tested-by: Cristian Birsan <cristian.birsan@xxxxxxxxxxxxx>
Link: https://lore.kernel.org/r/20220826083927.3107272-3-claudiu.beznea@xxxxxxxxxxxxx
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
arch/arm/mach-at91/pm_suspend.S | 24 +++++++++++++++++-------
include/soc/at91/sama7-ddr.h | 4 ++++
2 files changed, 21 insertions(+), 7 deletions(-)
diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S
index fdb4f63ecde4b..65cfcc19a936c 100644
--- a/arch/arm/mach-at91/pm_suspend.S
+++ b/arch/arm/mach-at91/pm_suspend.S
@@ -172,9 +172,15 @@ sr_ena_2:
/* Put DDR PHY's DLL in bypass mode for non-backup modes. */
cmp r7, #AT91_PM_BACKUP
beq sr_ena_3
- ldr tmp1, [r3, #DDR3PHY_PIR]
- orr tmp1, tmp1, #DDR3PHY_PIR_DLLBYP
- str tmp1, [r3, #DDR3PHY_PIR]
+
+ /* Disable DX DLLs. */
+ ldr tmp1, [r3, #DDR3PHY_DX0DLLCR]
+ orr tmp1, tmp1, #DDR3PHY_DXDLLCR_DLLDIS
+ str tmp1, [r3, #DDR3PHY_DX0DLLCR]
+
+ ldr tmp1, [r3, #DDR3PHY_DX1DLLCR]
+ orr tmp1, tmp1, #DDR3PHY_DXDLLCR_DLLDIS
+ str tmp1, [r3, #DDR3PHY_DX1DLLCR]
sr_ena_3:
/* Power down DDR PHY data receivers. */
@@ -221,10 +227,14 @@ sr_ena_3:
bic tmp1, tmp1, #DDR3PHY_DSGCR_ODTPDD_ODT0
str tmp1, [r3, #DDR3PHY_DSGCR]
- /* Take DDR PHY's DLL out of bypass mode. */
- ldr tmp1, [r3, #DDR3PHY_PIR]
- bic tmp1, tmp1, #DDR3PHY_PIR_DLLBYP
- str tmp1, [r3, #DDR3PHY_PIR]
+ /* Enable DX DLLs. */
+ ldr tmp1, [r3, #DDR3PHY_DX0DLLCR]
+ bic tmp1, tmp1, #DDR3PHY_DXDLLCR_DLLDIS
+ str tmp1, [r3, #DDR3PHY_DX0DLLCR]
+
+ ldr tmp1, [r3, #DDR3PHY_DX1DLLCR]
+ bic tmp1, tmp1, #DDR3PHY_DXDLLCR_DLLDIS
+ str tmp1, [r3, #DDR3PHY_DX1DLLCR]
/* Enable quasi-dynamic programming. */
mov tmp1, #0
diff --git a/include/soc/at91/sama7-ddr.h b/include/soc/at91/sama7-ddr.h
index f6542584ca139..f47a933df82ea 100644
--- a/include/soc/at91/sama7-ddr.h
+++ b/include/soc/at91/sama7-ddr.h
@@ -41,6 +41,10 @@
#define DDR3PHY_ZQ0SR0 (0x188) /* ZQ status register 0 */
+#define DDR3PHY_DX0DLLCR (0x1CC) /* DDR3PHY DATX8 DLL Control Register */
+#define DDR3PHY_DX1DLLCR (0x20C) /* DDR3PHY DATX8 DLL Control Register */
+#define DDR3PHY_DXDLLCR_DLLDIS (1 << 31) /* DLL Disable */
+
/* UDDRC */
#define UDDRC_STAT (0x04) /* UDDRC Operating Mode Status Register */
#define UDDRC_STAT_SELFREF_TYPE_DIS (0x0 << 4) /* SDRAM is not in Self-refresh */
--
2.35.1
