[PATCH 5.19 106/155] thunderbolt: Check router generation before connecting xHCI

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>

commit 93a3c0d4e8bfbb15145e5dd7da68a3de4b904aba upstream.

Only Thunderbolt 3 routers need the xHCI connection flow. This also
ensures the router actually has both lane adapters (1 and 3). While
there move declaration of the boolean variables inside the block where
they are being used.

Fixes: 30a4eca69b76 ("thunderbolt: Add internal xHCI connect flows for Thunderbolt 3 devices")
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
 drivers/thunderbolt/switch.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

--- a/drivers/thunderbolt/switch.c
+++ b/drivers/thunderbolt/switch.c
@@ -3781,14 +3781,18 @@ int tb_switch_pcie_l1_enable(struct tb_s
  */
 int tb_switch_xhci_connect(struct tb_switch *sw)
 {
-	bool usb_port1, usb_port3, xhci_port1, xhci_port3;
 	struct tb_port *port1, *port3;
 	int ret;
 
+	if (sw->generation != 3)
+		return 0;
+
 	port1 = &sw->ports[1];
 	port3 = &sw->ports[3];
 
 	if (tb_switch_is_alpine_ridge(sw)) {
+		bool usb_port1, usb_port3, xhci_port1, xhci_port3;
+
 		usb_port1 = tb_lc_is_usb_plugged(port1);
 		usb_port3 = tb_lc_is_usb_plugged(port3);
 		xhci_port1 = tb_lc_is_xhci_connected(port1);





[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux