[PATCH stable-5.4 2/3] USB: serial: ch341: fix lost character on LCR updates

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



commit 8e83622ae7ca481c76c8fd9579877f6abae64ca2 upstream.

Disable LCR updates for pre-0x30 devices which use a different (unknown)
protocol for line control and where the current register write causes
the next received character to be lost.

Note that updating LCR using the INIT command has no effect on these
devices either.

Reported-by: Jonathan Woithe <jwoithe@xxxxxxxxxx>
Tested-by: Jonathan Woithe <jwoithe@xxxxxxxxxx>
Link: https://lore.kernel.org/r/Ys1iPTfiZRWj2gXs@xxxxxxxxxxxxxxxxxxx
Fixes: 4e46c410e050 ("USB: serial: ch341: reinitialize chip on reconfiguration")
Fixes: 55fa15b5987d ("USB: serial: ch341: fix baud rate and line-control handling")
Cc: stable@xxxxxxxxxxxxxxx      # 4.10
Signed-off-by: Johan Hovold <johan@xxxxxxxxxx>
[ johan: adjust context to 5.4 ]
Signed-off-by: Johan Hovold <johan@xxxxxxxxxx>
---
 drivers/usb/serial/ch341.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c
index f06a09e59d8b..be44d6c28df6 100644
--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -96,7 +96,9 @@ struct ch341_private {
 	u8 mcr;
 	u8 msr;
 	u8 lcr;
+
 	unsigned long quirks;
+	u8 version;
 };
 
 static void ch341_set_termios(struct tty_struct *tty,
@@ -182,6 +184,9 @@ static int ch341_set_baudrate_lcr(struct usb_device *dev,
 	if (r)
 		return r;
 
+	if (priv->version < 0x30)
+		return 0;
+
 	r = ch341_control_out(dev, CH341_REQ_WRITE_REG, 0x2518, lcr);
 	if (r)
 		return r;
@@ -233,7 +238,9 @@ static int ch341_configure(struct usb_device *dev, struct ch341_private *priv)
 	r = ch341_control_in(dev, CH341_REQ_READ_VERSION, 0, 0, buffer, size);
 	if (r < 0)
 		goto out;
-	dev_dbg(&dev->dev, "Chip version: 0x%02x\n", buffer[0]);
+
+	priv->version = buffer[0];
+	dev_dbg(&dev->dev, "Chip version: 0x%02x\n", priv->version);
 
 	r = ch341_control_out(dev, CH341_REQ_SERIAL_INIT, 0, 0);
 	if (r < 0)
-- 
2.35.1




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux