On Mon, Aug 25, 2014 at 11:50:19PM +0800, Chen-Yu Tsai wrote:
> The "clock-frequency" DT property is listed as optional, However,
> the current code stores the return value of of_property_read_u32 in
> the return code of mv64xxx_of_config, but then forgets to clear it
> after setting the default value of "clock-frequency". It is then
> passed out to the main probe function, resulting in a probe failure
> when "clock-frequency" is missing.
>
> This patch checks and then throws away the result of
> of_property_read_u32, instead of storing it and having to clear it
> afterwards.
>
> This issue was discovered after the property was removed from all
> sunxi DTs.
>
> Signed-off-by: Chen-Yu Tsai <wens@xxxxxxxx>
> Cc: stable@xxxxxxxxxxxxxxx
It would be good to add
Fixes: 4c730a06c19bb ("i2c: mv64xxx: Set bus frequency to 100kHz if clock-frequency is not provided")
Acked-by: Andrew Lunn <andrew@xxxxxxx>
Andrew
> ---
> drivers/i2c/busses/i2c-mv64xxx.c | 3 +--
> 1 file changed, 1 insertion(+), 2 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c
> index 6dc5ded..2f64273 100644
> --- a/drivers/i2c/busses/i2c-mv64xxx.c
> +++ b/drivers/i2c/busses/i2c-mv64xxx.c
> @@ -746,8 +746,7 @@ mv64xxx_of_config(struct mv64xxx_i2c_data *drv_data,
> }
> tclk = clk_get_rate(drv_data->clk);
>
> - rc = of_property_read_u32(np, "clock-frequency", &bus_freq);
> - if (rc)
> + if (of_property_read_u32(np, "clock-frequency", &bus_freq))
> bus_freq = 100000; /* 100kHz by default */
>
> if (!mv64xxx_find_baud_factors(bus_freq, tclk,
> --
> 2.1.0
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html