The device will send an error event command, to indicate certain errors.
This indicates a misbehaving driver, and should never occur.
Cc: stable@xxxxxxxxxxxxxxx
Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices")
Tested-by: Anssi Hannula <anssi.hannula@xxxxxxxxxx>
Co-developed-by: Anssi Hannula <anssi.hannula@xxxxxxxxxx>
Signed-off-by: Anssi Hannula <anssi.hannula@xxxxxxxxxx>
Signed-off-by: Jimmy Assarsson <extja@xxxxxxxxxx>
---
Changes in v3:
- Rebased on 1d5eeda23f36 ("can: kvaser_usb: advertise timestamping capabilities and add ioctl support")
- Add stable to CC
- Add Tested-by Anssi Hannula
Changes in v2:
- New in v2. Replaces parts of [PATCH 09/12] can: kvaser_usb_leaf: Fix silently failing bus params
setup
.../net/can/usb/kvaser_usb/kvaser_usb_leaf.c | 99 +++++++++++++++++++
1 file changed, 99 insertions(+)
diff --git a/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c b/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c
index 24c474e9d579..cd5b67f48534 100644
--- a/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c
+++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c
@@ -70,6 +70,7 @@
#define CMD_GET_CARD_INFO_REPLY 35
#define CMD_GET_SOFTWARE_INFO 38
#define CMD_GET_SOFTWARE_INFO_REPLY 39
+#define CMD_ERROR_EVENT 45
#define CMD_FLUSH_QUEUE 48
#define CMD_TX_ACKNOWLEDGE 50
#define CMD_CAN_ERROR_EVENT 51
@@ -258,6 +259,28 @@ struct usbcan_cmd_can_error_event {
__le16 time;
} __packed;
+/* CMD_ERROR_EVENT error codes */
+#define KVASER_USB_LEAF_ERROR_EVENT_TX_QUEUE_FULL 0x8
+#define KVASER_USB_LEAF_ERROR_EVENT_PARAM 0x9
+
+struct leaf_cmd_error_event {
+ u8 tid;
+ u8 error_code;
+ __le16 timestamp[3];
+ __le16 padding;
+ __le16 info1;
+ __le16 info2;
+} __packed;
+
+struct usbcan_cmd_error_event {
+ u8 tid;
+ u8 error_code;
+ __le16 info1;
+ __le16 info2;
+ __le16 timestamp;
+ __le16 padding;
+} __packed;
+
struct kvaser_cmd_ctrl_mode {
u8 tid;
u8 channel;
@@ -321,6 +344,7 @@ struct kvaser_cmd {
struct leaf_cmd_chip_state_event chip_state_event;
struct leaf_cmd_can_error_event can_error_event;
struct leaf_cmd_log_message log_message;
+ struct leaf_cmd_error_event error_event;
struct kvaser_cmd_cap_req cap_req;
struct kvaser_cmd_cap_res cap_res;
} __packed leaf;
@@ -330,6 +354,7 @@ struct kvaser_cmd {
struct usbcan_cmd_rx_can rx_can;
struct usbcan_cmd_chip_state_event chip_state_event;
struct usbcan_cmd_can_error_event can_error_event;
+ struct usbcan_cmd_error_event error_event;
} __packed usbcan;
struct kvaser_cmd_tx_can tx_can;
@@ -353,6 +378,7 @@ static const u8 kvaser_usb_leaf_cmd_sizes_leaf[] = {
[CMD_CHIP_STATE_EVENT] = kvaser_fsize(u.leaf.chip_state_event),
[CMD_CAN_ERROR_EVENT] = kvaser_fsize(u.leaf.can_error_event),
[CMD_GET_CAPABILITIES_RESP] = kvaser_fsize(u.leaf.cap_res),
+ [CMD_ERROR_EVENT] = kvaser_fsize(u.leaf.error_event),
/* ignored events: */
[CMD_FLUSH_QUEUE_REPLY] = CMD_SIZE_ANY,
};
@@ -367,6 +393,7 @@ static const u8 kvaser_usb_leaf_cmd_sizes_usbcan[] = {
[CMD_RX_EXT_MESSAGE] = kvaser_fsize(u.usbcan.rx_can),
[CMD_CHIP_STATE_EVENT] = kvaser_fsize(u.usbcan.chip_state_event),
[CMD_CAN_ERROR_EVENT] = kvaser_fsize(u.usbcan.can_error_event),
+ [CMD_ERROR_EVENT] = kvaser_fsize(u.usbcan.error_event),
/* ignored events: */
[CMD_USBCAN_CLOCK_OVERFLOW_EVENT] = CMD_SIZE_ANY,
};
@@ -1304,6 +1331,74 @@ static void kvaser_usb_leaf_rx_can_msg(const struct kvaser_usb *dev,
netif_rx(skb);
}
+static void kvaser_usb_leaf_error_event_parameter(const struct kvaser_usb *dev,
+ const struct kvaser_cmd *cmd)
+{
+ u16 info1 = 0;
+
+ switch (dev->driver_info->family) {
+ case KVASER_LEAF:
+ info1 = le16_to_cpu(cmd->u.leaf.error_event.info1);
+ break;
+ case KVASER_USBCAN:
+ info1 = le16_to_cpu(cmd->u.usbcan.error_event.info1);
+ break;
+ }
+
+ /* info1 will contain the offending cmd_no */
+ switch (info1) {
+ case CMD_SET_CTRL_MODE:
+ dev_warn(&dev->intf->dev,
+ "CMD_SET_CTRL_MODE error in parameter\n");
+ break;
+
+ case CMD_SET_BUS_PARAMS:
+ dev_warn(&dev->intf->dev,
+ "CMD_SET_BUS_PARAMS error in parameter\n");
+ break;
+
+ default:
+ dev_warn(&dev->intf->dev,
+ "Unhandled parameter error event cmd_no (%u)\n",
+ info1);
+ break;
+ }
+}
+
+static void kvaser_usb_leaf_error_event(const struct kvaser_usb *dev,
+ const struct kvaser_cmd *cmd)
+{
+ u8 error_code = 0;
+
+ switch (dev->driver_info->family) {
+ case KVASER_LEAF:
+ error_code = cmd->u.leaf.error_event.error_code;
+ break;
+ case KVASER_USBCAN:
+ error_code = cmd->u.usbcan.error_event.error_code;
+ break;
+ }
+
+ switch (error_code) {
+ case KVASER_USB_LEAF_ERROR_EVENT_TX_QUEUE_FULL:
+ /* Received additional CAN message, when firmware TX queue is
+ * already full. Something is wrong with the driver.
+ * This should never happen!
+ */
+ dev_err(&dev->intf->dev,
+ "Received error event TX_QUEUE_FULL\n");
+ break;
+ case KVASER_USB_LEAF_ERROR_EVENT_PARAM:
+ kvaser_usb_leaf_error_event_parameter(dev, cmd);
+ break;
+
+ default:
+ dev_warn(&dev->intf->dev,
+ "Unhandled error event (%d)\n", error_code);
+ break;
+ }
+}
+
static void kvaser_usb_leaf_start_chip_reply(const struct kvaser_usb *dev,
const struct kvaser_cmd *cmd)
{
@@ -1382,6 +1477,10 @@ static void kvaser_usb_leaf_handle_command(const struct kvaser_usb *dev,
kvaser_usb_leaf_tx_acknowledge(dev, cmd);
break;
+ case CMD_ERROR_EVENT:
+ kvaser_usb_leaf_error_event(dev, cmd);
+ break;
+
/* Ignored commands */
case CMD_USBCAN_CLOCK_OVERFLOW_EVENT:
if (dev->driver_info->family != KVASER_USBCAN)
--
2.37.3
