The patch below does not apply to the 5.15-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable@xxxxxxxxxxxxxxx>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 34fc9cc3aebe8b9e27d3bc821543dd482dc686ca Mon Sep 17 00:00:00 2001 From: Heinrich Schuchardt <heinrich.schuchardt@xxxxxxxxxxxxx> Date: Wed, 17 Aug 2022 15:25:21 +0200 Subject: [PATCH] riscv: dts: microchip: correct L2 cache interrupts MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The "PolarFire SoC MSS Technical Reference Manual" documents the following PLIC interrupts: 1 - L2 Cache Controller Signals when a metadata correction event occurs 2 - L2 Cache Controller Signals when an uncorrectable metadata event occurs 3 - L2 Cache Controller Signals when a data correction event occurs 4 - L2 Cache Controller Signals when an uncorrectable data event occurs This differs from the SiFive FU540 which only has three L2 cache related interrupts. The sequence in the device tree is defined by an enum: enum { DIR_CORR = 0, DATA_CORR, DATA_UNCORR, DIR_UNCORR, }; So the correct sequence of the L2 cache interrupts is interrupts = <1>, <3>, <4>, <2>; [Conor] This manifests as an unusable system if the l2-cache driver is enabled, as the wrong interrupt gets cleared & the handler prints errors to the console ad infinitum. Fixes: 0fa6107eca41 ("RISC-V: Initial DTS for Microchip ICICLE board") CC: stable@xxxxxxxxxxxxxxx # 5.15: e35b07a7df9b: riscv: dts: microchip: mpfs: Group tuples in interrupt properties Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@xxxxxxxxxxxxx> Signed-off-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx> diff --git a/arch/riscv/boot/dts/microchip/mpfs.dtsi b/arch/riscv/boot/dts/microchip/mpfs.dtsi index 499c2e63ad35..0a6ad5b9ff8d 100644 --- a/arch/riscv/boot/dts/microchip/mpfs.dtsi +++ b/arch/riscv/boot/dts/microchip/mpfs.dtsi @@ -193,7 +193,7 @@ cache-size = <2097152>; cache-unified; interrupt-parent = <&plic>; - interrupts = <1>, <2>, <3>; + interrupts = <1>, <3>, <4>, <2>; }; clint: clint@2000000 {