From: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
[ Upstream commit edb67843983bbdf61b4c8c3c50618003d38bb4ae ]
operating-points is a uint32-matrix as per opp-v1.yaml. Change it
accordingly. While at it, change fsl,soc-operating-points as well,
although there is no bindings file (yet). But they should have the same
format. Fixes the dt_binding_check warning:
cpu@0: operating-points:0: [696000, 1275000, 528000, 1175000, 396000,
1025000, 198000, 950000] is too long
cpu@0: operating-points:0: Additional items are not allowed (528000,
1175000, 396000, 1025000, 198000, 950000 were unexpected)
Signed-off-by: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
Signed-off-by: Shawn Guo <shawnguo@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
arch/arm/boot/dts/imx6ul.dtsi | 22 ++++++++++------------
1 file changed, 10 insertions(+), 12 deletions(-)
diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
index 630643013bdc..baf4a41a9aa9 100644
--- a/arch/arm/boot/dts/imx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul.dtsi
@@ -62,20 +62,18 @@ cpu0: cpu@0 {
clock-frequency = <696000000>;
clock-latency = <61036>; /* two CLK32 periods */
#cooling-cells = <2>;
- operating-points = <
+ operating-points =
/* kHz uV */
- 696000 1275000
- 528000 1175000
- 396000 1025000
- 198000 950000
- >;
- fsl,soc-operating-points = <
+ <696000 1275000>,
+ <528000 1175000>,
+ <396000 1025000>,
+ <198000 950000>;
+ fsl,soc-operating-points =
/* KHz uV */
- 696000 1275000
- 528000 1175000
- 396000 1175000
- 198000 1175000
- >;
+ <696000 1275000>,
+ <528000 1175000>,
+ <396000 1175000>,
+ <198000 1175000>;
clocks = <&clks IMX6UL_CLK_ARM>,
<&clks IMX6UL_CLK_PLL2_BUS>,
<&clks IMX6UL_CLK_PLL2_PFD2>,
--
2.35.1
