From: Emil Tantilov <emil.s.tantilov@xxxxxxxxx>
This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.
===============
commit 2e0103810c6fed6a736c4a3af87b0f5c6bd8cd5b upstream.
This patch resolves an issue where the logic used to detect changes in rx-usecs
was incorrect and was masked by the call to ixgbe_update_rsc().
Setting rx-usecs between 0,2-9 and 1,10 and up requires a reset to allow
ixgbe_configure_tx_ring() to set the correct value for TXDCTL.WTHRESH in
order to avoid Tx hangs with BQL enabled.
Signed-off-by: Emil Tantilov <emil.s.tantilov@xxxxxxxxx>
Tested-by: Phil Schmitt <phillip.j.schmitt@xxxxxxxxx>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@xxxxxxxxx>
Signed-off-by: Jiri Slaby <jslaby@xxxxxxx>
---
drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
index e8649abf97c0..2cd86d30508b 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
@@ -2212,13 +2212,13 @@ static int ixgbe_set_coalesce(struct net_device *netdev,
#if IS_ENABLED(CONFIG_BQL)
/* detect ITR changes that require update of TXDCTL.WTHRESH */
- if ((adapter->tx_itr_setting > 1) &&
+ if ((adapter->tx_itr_setting != 1) &&
(adapter->tx_itr_setting < IXGBE_100K_ITR)) {
if ((tx_itr_prev == 1) ||
- (tx_itr_prev > IXGBE_100K_ITR))
+ (tx_itr_prev >= IXGBE_100K_ITR))
need_reset = true;
} else {
- if ((tx_itr_prev > 1) &&
+ if ((tx_itr_prev != 1) &&
(tx_itr_prev < IXGBE_100K_ITR))
need_reset = true;
}
--
2.0.4
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html