From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
commit 11bd0ffd165fce7aff1a2ed15c04c088239f3d42 upstream.
When this property was introduced, it contained underscores, but
the actual code wants dashes.
Change it from mediatek,rsel_resistance_in_si_unit to
mediatek,rsel-resistance-in-si-unit.
Fixes: 91e7edceda96 ("dt-bindings: pinctrl: mt8195: change pull up/down description")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@xxxxxxxxxxxxx>
Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
Link: https://lore.kernel.org/r/20220630122334.216903-1-angelogioacchino.delregno@xxxxxxxxxxxxx
Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml
@@ -49,7 +49,7 @@ properties:
description: The interrupt outputs to sysirq.
maxItems: 1
- mediatek,rsel_resistance_in_si_unit:
+ mediatek,rsel-resistance-in-si-unit:
type: boolean
description: |
Identifying i2c pins pull up/down type which is RSEL. It can support
@@ -142,7 +142,7 @@ patternProperties:
"MTK_PUPD_SET_R1R0_11" define in mt8195.
For pull down type is RSEL, it can add RSEL define & resistance
value(ohm) to set different resistance by identifying property
- "mediatek,rsel_resistance_in_si_unit".
+ "mediatek,rsel-resistance-in-si-unit".
It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001"
& "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011"
& "MTK_PULL_SET_RSEL_100" & "MTK_PULL_SET_RSEL_101"
@@ -161,7 +161,7 @@ patternProperties:
};
An example of using si unit resistance value(ohm):
&pio {
- mediatek,rsel_resistance_in_si_unit;
+ mediatek,rsel-resistance-in-si-unit;
}
pincontroller {
i2c0_pin {
@@ -190,7 +190,7 @@ patternProperties:
"MTK_PUPD_SET_R1R0_11" define in mt8195.
For pull up type is RSEL, it can add RSEL define & resistance
value(ohm) to set different resistance by identifying property
- "mediatek,rsel_resistance_in_si_unit".
+ "mediatek,rsel-resistance-in-si-unit".
It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001"
& "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011"
& "MTK_PULL_SET_RSEL_100" & "MTK_PULL_SET_RSEL_101"
@@ -209,7 +209,7 @@ patternProperties:
};
An example of using si unit resistance value(ohm):
&pio {
- mediatek,rsel_resistance_in_si_unit;
+ mediatek,rsel-resistance-in-si-unit;
}
pincontroller {
i2c0-pins {
