From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx> [ Upstream commit 1177384179416c7136e1348f07609e0da1ae6b91 ] PCI subsystem provides convenient shortcut macros for message printing. Use those macros instead of dev_*(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx> Reviewed-by: Jiri Slaby <jslaby@xxxxxxxxxx> Link: https://lore.kernel.org/r/20211022135147.70965-3-andriy.shevchenko@xxxxxxxxxxxxxxx Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- drivers/tty/serial/8250/8250_pci.c | 52 +++++++++++++----------------- 1 file changed, 22 insertions(+), 30 deletions(-) diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index 7ce755b47a3d..d2b38ae896d1 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -75,13 +75,12 @@ static int pci_default_setup(struct serial_private*, static void moan_device(const char *str, struct pci_dev *dev) { - dev_err(&dev->dev, - "%s: %s\n" + pci_err(dev, "%s\n" "Please send the output of lspci -vv, this\n" "message (0x%04x,0x%04x,0x%04x,0x%04x), the\n" "manufacturer and name of serial board or\n" "modem board to <linux-serial@xxxxxxxxxxxxxxx>.\n", - pci_name(dev), str, dev->vendor, dev->device, + str, dev->vendor, dev->device, dev->subsystem_vendor, dev->subsystem_device); } @@ -238,7 +237,7 @@ static int pci_inteli960ni_init(struct pci_dev *dev) /* is firmware started? */ pci_read_config_dword(dev, 0x44, &oldval); if (oldval == 0x00001000L) { /* RESET value */ - dev_dbg(&dev->dev, "Local i960 firmware missing\n"); + pci_dbg(dev, "Local i960 firmware missing\n"); return -ENODEV; } return 0; @@ -588,9 +587,8 @@ static int pci_timedia_probe(struct pci_dev *dev) * (0,2,3,5,6: serial only -- 7,8,9: serial + parallel) */ if ((dev->subsystem_device & 0x00f0) >= 0x70) { - dev_info(&dev->dev, - "ignoring Timedia subdevice %04x for parport_serial\n", - dev->subsystem_device); + pci_info(dev, "ignoring Timedia subdevice %04x for parport_serial\n", + dev->subsystem_device); return -ENODEV; } @@ -827,8 +825,7 @@ static int pci_netmos_9900_numports(struct pci_dev *dev) if (sub_serports > 0) return sub_serports; - dev_err(&dev->dev, - "NetMos/Mostech serial driver ignoring port on ambiguous config.\n"); + pci_err(dev, "NetMos/Mostech serial driver ignoring port on ambiguous config.\n"); return 0; } @@ -927,7 +924,7 @@ static int pci_ite887x_init(struct pci_dev *dev) } if (i == ARRAY_SIZE(inta_addr)) { - dev_err(&dev->dev, "ite887x: could not find iobase\n"); + pci_err(dev, "could not find iobase\n"); return -ENODEV; } @@ -1022,9 +1019,7 @@ static int pci_endrun_init(struct pci_dev *dev) /* EndRun device */ if (deviceID == 0x07000200) { number_uarts = ioread8(p + 4); - dev_dbg(&dev->dev, - "%d ports detected on EndRun PCI Express device\n", - number_uarts); + pci_dbg(dev, "%d ports detected on EndRun PCI Express device\n", number_uarts); } pci_iounmap(dev, p); return number_uarts; @@ -1054,9 +1049,7 @@ static int pci_oxsemi_tornado_init(struct pci_dev *dev) /* Tornado device */ if (deviceID == 0x07000200) { number_uarts = ioread8(p + 4); - dev_dbg(&dev->dev, - "%d ports detected on Oxford PCI Express device\n", - number_uarts); + pci_dbg(dev, "%d ports detected on Oxford PCI Express device\n", number_uarts); } pci_iounmap(dev, p); return number_uarts; @@ -1116,15 +1109,15 @@ static struct quatech_feature quatech_cards[] = { { 0, } }; -static int pci_quatech_amcc(u16 devid) +static int pci_quatech_amcc(struct pci_dev *dev) { struct quatech_feature *qf = &quatech_cards[0]; while (qf->devid) { - if (qf->devid == devid) + if (qf->devid == dev->device) return qf->amcc; qf++; } - pr_err("quatech: unknown port type '0x%04X'.\n", devid); + pci_err(dev, "unknown port type '0x%04X'.\n", dev->device); return 0; }; @@ -1287,7 +1280,7 @@ static int pci_quatech_rs422(struct uart_8250_port *port) static int pci_quatech_init(struct pci_dev *dev) { - if (pci_quatech_amcc(dev->device)) { + if (pci_quatech_amcc(dev)) { unsigned long base = pci_resource_start(dev, 0); if (base) { u32 tmp; @@ -1311,7 +1304,7 @@ static int pci_quatech_setup(struct serial_private *priv, port->port.uartclk = pci_quatech_clock(port); /* For now just warn about RS422 */ if (pci_quatech_rs422(port)) - pr_warn("quatech: software control of RS422 features not currently supported.\n"); + pci_warn(priv->dev, "software control of RS422 features not currently supported.\n"); return pci_default_setup(priv, board, port, idx); } @@ -1525,7 +1518,7 @@ static int pci_fintek_setup(struct serial_private *priv, /* Get the io address from configuration space */ pci_read_config_word(pdev, config_base + 4, &iobase); - dev_dbg(&pdev->dev, "%s: idx=%d iobase=0x%x", __func__, idx, iobase); + pci_dbg(pdev, "idx=%d iobase=0x%x", idx, iobase); port->port.iotype = UPIO_PORT; port->port.iobase = iobase; @@ -1689,7 +1682,7 @@ static int skip_tx_en_setup(struct serial_private *priv, struct uart_8250_port *port, int idx) { port->port.quirks |= UPQ_NO_TXEN_TEST; - dev_dbg(&priv->dev->dev, + pci_dbg(priv->dev, "serial8250: skipping TxEn test for device [%04x:%04x] subsystem [%04x:%04x]\n", priv->dev->vendor, priv->dev->device, priv->dev->subsystem_vendor, priv->dev->subsystem_device); @@ -4007,12 +4000,12 @@ pciserial_init_ports(struct pci_dev *dev, const struct pciserial_board *board) uart.port.irq = 0; } else { if (pci_match_id(pci_use_msi, dev)) { - dev_dbg(&dev->dev, "Using MSI(-X) interrupts\n"); + pci_dbg(dev, "Using MSI(-X) interrupts\n"); pci_set_master(dev); uart.port.flags &= ~UPF_SHARE_IRQ; rc = pci_alloc_irq_vectors(dev, 1, 1, PCI_IRQ_ALL_TYPES); } else { - dev_dbg(&dev->dev, "Using legacy interrupts\n"); + pci_dbg(dev, "Using legacy interrupts\n"); rc = pci_alloc_irq_vectors(dev, 1, 1, PCI_IRQ_LEGACY); } if (rc < 0) { @@ -4030,12 +4023,12 @@ pciserial_init_ports(struct pci_dev *dev, const struct pciserial_board *board) if (quirk->setup(priv, board, &uart, i)) break; - dev_dbg(&dev->dev, "Setup PCI port: port %lx, irq %d, type %d\n", + pci_dbg(dev, "Setup PCI port: port %lx, irq %d, type %d\n", uart.port.iobase, uart.port.irq, uart.port.iotype); priv->line[i] = serial8250_register_8250_port(&uart); if (priv->line[i] < 0) { - dev_err(&dev->dev, + pci_err(dev, "Couldn't register serial port %lx, irq %d, type %d, error %d\n", uart.port.iobase, uart.port.irq, uart.port.iotype, priv->line[i]); @@ -4131,8 +4124,7 @@ pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent) } if (ent->driver_data >= ARRAY_SIZE(pci_boards)) { - dev_err(&dev->dev, "invalid driver_data: %ld\n", - ent->driver_data); + pci_err(dev, "invalid driver_data: %ld\n", ent->driver_data); return -EINVAL; } @@ -4215,7 +4207,7 @@ static int pciserial_resume_one(struct device *dev) err = pci_enable_device(pdev); /* FIXME: We cannot simply error out here */ if (err) - dev_err(dev, "Unable to re-enable ports, trying to continue.\n"); + pci_err(pdev, "Unable to re-enable ports, trying to continue.\n"); pciserial_resume_ports(priv); } return 0; -- 2.35.1
