[PATCH 3.13 125/259] igb: Workaround for i210 Errata 25: Slow System Clock

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



3.13.11.6 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Todd Fujinaka <todd.fujinaka@xxxxxxxxx>

commit 948264879b6894dc389a44b99fae4f0b72932619 upstream.

On some devices, the internal PLL circuit occasionally provides the
wrong clock frequency after power up. The probability of failure is less
than one failure per 1000 power cycles. When the failure occurs, the
internal clock frequency is around 1/20 of the correct frequency.

Signed-off-by: Todd Fujinaka <todd.fujinaka@xxxxxxxxx>
Tested-by: Aaron Brown <aaron.f.brown@xxxxxxxxx>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@xxxxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Kamal Mostafa <kamal@xxxxxxxxxxxxx>
---
 drivers/net/ethernet/intel/igb/e1000_82575.c   |  7 +++
 drivers/net/ethernet/intel/igb/e1000_defines.h | 18 +++----
 drivers/net/ethernet/intel/igb/e1000_hw.h      |  3 ++
 drivers/net/ethernet/intel/igb/e1000_i210.c    | 66 ++++++++++++++++++++++++++
 drivers/net/ethernet/intel/igb/e1000_i210.h    | 12 +++++
 drivers/net/ethernet/intel/igb/e1000_regs.h    |  1 +
 drivers/net/ethernet/intel/igb/igb_main.c      | 14 ++++++
 7 files changed, 113 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.c b/drivers/net/ethernet/intel/igb/e1000_82575.c
index 47c2d10..974558e 100644
--- a/drivers/net/ethernet/intel/igb/e1000_82575.c
+++ b/drivers/net/ethernet/intel/igb/e1000_82575.c
@@ -1403,6 +1403,13 @@ static s32 igb_init_hw_82575(struct e1000_hw *hw)
 	s32 ret_val;
 	u16 i, rar_count = mac->rar_entry_count;
 
+	if ((hw->mac.type >= e1000_i210) &&
+	    !(igb_get_flash_presence_i210(hw))) {
+		ret_val = igb_pll_workaround_i210(hw);
+		if (ret_val)
+			return ret_val;
+	}
+
 	/* Initialize identification LED */
 	ret_val = igb_id_led_init(hw);
 	if (ret_val) {
diff --git a/drivers/net/ethernet/intel/igb/e1000_defines.h b/drivers/net/ethernet/intel/igb/e1000_defines.h
index 978eca3..956c4c3 100644
--- a/drivers/net/ethernet/intel/igb/e1000_defines.h
+++ b/drivers/net/ethernet/intel/igb/e1000_defines.h
@@ -46,14 +46,15 @@
 /* Extended Device Control */
 #define E1000_CTRL_EXT_SDP3_DATA 0x00000080 /* Value of SW Defineable Pin 3 */
 /* Physical Func Reset Done Indication */
-#define E1000_CTRL_EXT_PFRSTD    0x00004000
-#define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000
-#define E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES  0x00C00000
-#define E1000_CTRL_EXT_LINK_MODE_1000BASE_KX  0x00400000
-#define E1000_CTRL_EXT_LINK_MODE_SGMII   0x00800000
-#define E1000_CTRL_EXT_LINK_MODE_GMII   0x00000000
-#define E1000_CTRL_EXT_EIAME          0x01000000
-#define E1000_CTRL_EXT_IRCA           0x00000001
+#define E1000_CTRL_EXT_PFRSTD	0x00004000
+#define E1000_CTRL_EXT_SDLPE	0X00040000  /* SerDes Low Power Enable */
+#define E1000_CTRL_EXT_LINK_MODE_MASK	0x00C00000
+#define E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES	0x00C00000
+#define E1000_CTRL_EXT_LINK_MODE_1000BASE_KX	0x00400000
+#define E1000_CTRL_EXT_LINK_MODE_SGMII	0x00800000
+#define E1000_CTRL_EXT_LINK_MODE_GMII	0x00000000
+#define E1000_CTRL_EXT_EIAME	0x01000000
+#define E1000_CTRL_EXT_IRCA		0x00000001
 /* Interrupt delay cancellation */
 /* Driver loaded bit for FW */
 #define E1000_CTRL_EXT_DRV_LOAD       0x10000000
@@ -62,6 +63,7 @@
 /* packet buffer parity error detection enabled */
 /* descriptor FIFO parity error detection enable */
 #define E1000_CTRL_EXT_PBA_CLR		0x80000000 /* PBA Clear */
+#define E1000_CTRL_EXT_PHYPDEN		0x00100000
 #define E1000_I2CCMD_REG_ADDR_SHIFT	16
 #define E1000_I2CCMD_PHY_ADDR_SHIFT	24
 #define E1000_I2CCMD_OPCODE_READ	0x08000000
diff --git a/drivers/net/ethernet/intel/igb/e1000_hw.h b/drivers/net/ethernet/intel/igb/e1000_hw.h
index 2e166b2..01c36b8 100644
--- a/drivers/net/ethernet/intel/igb/e1000_hw.h
+++ b/drivers/net/ethernet/intel/igb/e1000_hw.h
@@ -569,4 +569,7 @@ struct net_device *igb_get_hw_dev(struct e1000_hw *hw);
 /* These functions must be implemented by drivers */
 s32 igb_read_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value);
 s32 igb_write_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value);
+
+void igb_read_pci_cfg(struct e1000_hw *hw, u32 reg, u16 *value);
+void igb_write_pci_cfg(struct e1000_hw *hw, u32 reg, u16 *value);
 #endif /* _E1000_HW_H_ */
diff --git a/drivers/net/ethernet/intel/igb/e1000_i210.c b/drivers/net/ethernet/intel/igb/e1000_i210.c
index 0c03933..0217d4e 100644
--- a/drivers/net/ethernet/intel/igb/e1000_i210.c
+++ b/drivers/net/ethernet/intel/igb/e1000_i210.c
@@ -835,3 +835,69 @@ s32 igb_init_nvm_params_i210(struct e1000_hw *hw)
 	}
 	return ret_val;
 }
+
+/**
+ * igb_pll_workaround_i210
+ * @hw: pointer to the HW structure
+ *
+ * Works around an errata in the PLL circuit where it occasionally
+ * provides the wrong clock frequency after power up.
+ **/
+s32 igb_pll_workaround_i210(struct e1000_hw *hw)
+{
+	s32 ret_val;
+	u32 wuc, mdicnfg, ctrl, ctrl_ext, reg_val;
+	u16 nvm_word, phy_word, pci_word, tmp_nvm;
+	int i;
+
+	/* Get and set needed register values */
+	wuc = rd32(E1000_WUC);
+	mdicnfg = rd32(E1000_MDICNFG);
+	reg_val = mdicnfg & ~E1000_MDICNFG_EXT_MDIO;
+	wr32(E1000_MDICNFG, reg_val);
+
+	/* Get data from NVM, or set default */
+	ret_val = igb_read_invm_word_i210(hw, E1000_INVM_AUTOLOAD,
+					  &nvm_word);
+	if (ret_val)
+		nvm_word = E1000_INVM_DEFAULT_AL;
+	tmp_nvm = nvm_word | E1000_INVM_PLL_WO_VAL;
+	for (i = 0; i < E1000_MAX_PLL_TRIES; i++) {
+		/* check current state directly from internal PHY */
+		igb_read_phy_reg_gs40g(hw, (E1000_PHY_PLL_FREQ_PAGE |
+					 E1000_PHY_PLL_FREQ_REG), &phy_word);
+		if ((phy_word & E1000_PHY_PLL_UNCONF)
+		    != E1000_PHY_PLL_UNCONF) {
+			ret_val = 0;
+			break;
+		} else {
+			ret_val = -E1000_ERR_PHY;
+		}
+		/* directly reset the internal PHY */
+		ctrl = rd32(E1000_CTRL);
+		wr32(E1000_CTRL, ctrl|E1000_CTRL_PHY_RST);
+
+		ctrl_ext = rd32(E1000_CTRL_EXT);
+		ctrl_ext |= (E1000_CTRL_EXT_PHYPDEN | E1000_CTRL_EXT_SDLPE);
+		wr32(E1000_CTRL_EXT, ctrl_ext);
+
+		wr32(E1000_WUC, 0);
+		reg_val = (E1000_INVM_AUTOLOAD << 4) | (tmp_nvm << 16);
+		wr32(E1000_EEARBC_I210, reg_val);
+
+		igb_read_pci_cfg(hw, E1000_PCI_PMCSR, &pci_word);
+		pci_word |= E1000_PCI_PMCSR_D3;
+		igb_write_pci_cfg(hw, E1000_PCI_PMCSR, &pci_word);
+		usleep_range(1000, 2000);
+		pci_word &= ~E1000_PCI_PMCSR_D3;
+		igb_write_pci_cfg(hw, E1000_PCI_PMCSR, &pci_word);
+		reg_val = (E1000_INVM_AUTOLOAD << 4) | (nvm_word << 16);
+		wr32(E1000_EEARBC_I210, reg_val);
+
+		/* restore WUC register */
+		wr32(E1000_WUC, wuc);
+	}
+	/* restore MDICNFG setting */
+	wr32(E1000_MDICNFG, mdicnfg);
+	return ret_val;
+}
diff --git a/drivers/net/ethernet/intel/igb/e1000_i210.h b/drivers/net/ethernet/intel/igb/e1000_i210.h
index 2d91371..710f8e9 100644
--- a/drivers/net/ethernet/intel/igb/e1000_i210.h
+++ b/drivers/net/ethernet/intel/igb/e1000_i210.h
@@ -46,6 +46,7 @@ s32 igb_read_xmdio_reg(struct e1000_hw *hw, u16 addr, u8 dev_addr, u16 *data);
 s32 igb_write_xmdio_reg(struct e1000_hw *hw, u16 addr, u8 dev_addr, u16 data);
 s32 igb_init_nvm_params_i210(struct e1000_hw *hw);
 bool igb_get_flash_presence_i210(struct e1000_hw *hw);
+s32 igb_pll_workaround_i210(struct e1000_hw *hw);
 
 #define E1000_STM_OPCODE		0xDB00
 #define E1000_EEPROM_FLASH_SIZE_WORD	0x11
@@ -91,4 +92,15 @@ enum E1000_INVM_STRUCTURE_TYPE {
 #define NVM_LED_1_CFG_DEFAULT_I211	0x0184
 #define NVM_LED_0_2_CFG_DEFAULT_I211	0x200C
 
+/* PLL Defines */
+#define E1000_PCI_PMCSR			0x44
+#define E1000_PCI_PMCSR_D3		0x03
+#define E1000_MAX_PLL_TRIES		5
+#define E1000_PHY_PLL_UNCONF		0xFF
+#define E1000_PHY_PLL_FREQ_PAGE		0xFC0000
+#define E1000_PHY_PLL_FREQ_REG		0x000E
+#define E1000_INVM_DEFAULT_AL		0x202F
+#define E1000_INVM_AUTOLOAD		0x0A
+#define E1000_INVM_PLL_WO_VAL		0x0010
+
 #endif
diff --git a/drivers/net/ethernet/intel/igb/e1000_regs.h b/drivers/net/ethernet/intel/igb/e1000_regs.h
index 82632c6..7156981 100644
--- a/drivers/net/ethernet/intel/igb/e1000_regs.h
+++ b/drivers/net/ethernet/intel/igb/e1000_regs.h
@@ -69,6 +69,7 @@
 #define E1000_PBA      0x01000  /* Packet Buffer Allocation - RW */
 #define E1000_PBS      0x01008  /* Packet Buffer Size */
 #define E1000_EEMNGCTL 0x01010  /* MNG EEprom Control */
+#define E1000_EEARBC_I210 0x12024  /* EEPROM Auto Read Bus Control */
 #define E1000_EEWR     0x0102C  /* EEPROM Write Register - RW */
 #define E1000_I2CCMD   0x01028  /* SFPI2C Command Register - RW */
 #define E1000_FRTIMER  0x01048  /* Free Running Timer - RW */
diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index 0f42ce8..ddbf995 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -6914,6 +6914,20 @@ static int igb_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
 	}
 }
 
+void igb_read_pci_cfg(struct e1000_hw *hw, u32 reg, u16 *value)
+{
+	struct igb_adapter *adapter = hw->back;
+
+	pci_read_config_word(adapter->pdev, reg, value);
+}
+
+void igb_write_pci_cfg(struct e1000_hw *hw, u32 reg, u16 *value)
+{
+	struct igb_adapter *adapter = hw->back;
+
+	pci_write_config_word(adapter->pdev, reg, *value);
+}
+
 s32 igb_read_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value)
 {
 	struct igb_adapter *adapter = hw->back;
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]