[PATCH 5.18 030/158] e1000e: Enable GPT clock before sending message to CSME

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Sasha Neftin <sasha.neftin@xxxxxxxxx>

[ Upstream commit b49feacbeffc7635cc6692cbcc6a1eae2c17da6f ]

On corporate (CSME) ADL systems, the Ethernet Controller may stop working
("HW unit hang") after exiting from the s0ix state. The reason is that
CSME misses the message sent by the host. Enabling the dynamic GPT clock
solves this problem. This clock is cleared upon HW initialization.

Fixes: 3e55d231716e ("e1000e: Add handshake with the CSME to support S0ix")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=214821
Reviewed-by: Dima Ruinskiy <dima.ruinskiy@xxxxxxxxx>
Signed-off-by: Sasha Neftin <sasha.neftin@xxxxxxxxx>
Tested-by: Chia-Lin Kao (AceLan) <acelan.kao@xxxxxxxxxxxxx>
Tested-by: Naama Meir <naamax.meir@xxxxxxxxxxxxxxx>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@xxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/net/ethernet/intel/e1000e/netdev.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index fa06f68c8c80..c64102b29862 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -6494,6 +6494,10 @@ static void e1000e_s0ix_exit_flow(struct e1000_adapter *adapter)
 
 	if (er32(FWSM) & E1000_ICH_FWSM_FW_VALID &&
 	    hw->mac.type >= e1000_pch_adp) {
+		/* Keep the GPT clock enabled for CSME */
+		mac_data = er32(FEXTNVM);
+		mac_data |= BIT(3);
+		ew32(FEXTNVM, mac_data);
 		/* Request ME unconfigure the device from S0ix */
 		mac_data = er32(H2ME);
 		mac_data &= ~E1000_H2ME_START_DPG;
-- 
2.35.1






[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux