The following error is seen after a suspend/resume cycle on a mx53qsb with a
MC34708 PMIC:
root@freescale /$ echo mem > /sys/power/state
[ 32.630592] PM: Syncing filesystems ... done.
[ 32.643924] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 32.652384] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 32.679156] PM: suspend of devices complete after 13.113 msecs
[ 32.685128] PM: suspend devices took 0.030 seconds
[ 32.696109] PM: late suspend of devices complete after 6.133 msecs
[ 33.313032] mc13xxx 0-0008: Failed to read IRQ status: -110
[ 33.322009] PM: noirq suspend of devices complete after 619.667 msecs
[ 33.328544] Disabling non-boot CPUs ...
[ 33.335031] PM: noirq resume of devices complete after 2.352 msecs
[ 33.842940] mc13xxx 0-0008: Failed to read IRQ status: -110
[ 33.976095] [sched_delayed] sched: RT throttling activated
[ 33.984804] PM: early resume of devices complete after 642.642 msecs
[ 34.352954] mc13xxx 0-0008: Failed to read IRQ status: -110
[ 34.862910] mc13xxx 0-0008: Failed to read IRQ status: -110
[ 34.996595] PM: resume of devices complete after 1005.367 msecs
[ 35.372925] mc13xxx 0-0008: Failed to read IRQ status: -110
[ 35.882911] mc13xxx 0-0008: Failed to read IRQ status: -110
[ 35.955707] PM: resume devices took 1.970 seconds
[ 35.960445] Restarting tasks ... done.
[ 35.993386] fec 63fec000.ethernet eth0: Link is Down
[ 36.392980] mc13xxx 0-0008: Failed to read IRQ status: -110
[ 36.902908] mc13xxx 0-0008: Failed to read IRQ status: -110
[ 36.953036] ata1: SATA link down (SStatus 0 SControl 300)
[ 37.412922] mc13xxx 0-0008: Failed to read IRQ status: -110
[ 37.922906] mc13xxx 0-0008: Failed to read IRQ status: -110
[ 37.993379] fec 63fec000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[ 38.432938] mc13xxx 0-0008: Failed to read IRQ status: -110
[ 38.942920] mc13xxx 0-0008: Failed to read IRQ status: -110
[ 39.452933] mc13xxx 0-0008: Failed to read IRQ status: -110
(flood of this error message continues forever)
Commit 5169df8be0a432ee ("ARM: dts: i.MX53: add support for MCIMX53-START-R")
missed to configure the IOMUX for the PMIC IRQ pin.
Configure the PMIC IRQ pin so that the suspend/resume sequence behaves cleanly
as expected.
Cc: <stable@xxxxxxxxxxxxxxx> # 3.16
Signed-off-by: Fabio Estevam <fabio.estevam@xxxxxxxxxxxxx>
---
arch/arm/boot/dts/imx53-qsrb.dts | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/imx53-qsrb.dts b/arch/arm/boot/dts/imx53-qsrb.dts
index f1bbf9a..82d623d 100644
--- a/arch/arm/boot/dts/imx53-qsrb.dts
+++ b/arch/arm/boot/dts/imx53-qsrb.dts
@@ -28,6 +28,12 @@
MX53_PAD_CSI0_DAT9__I2C1_SCL 0x400001ec
>;
};
+
+ pinctrl_pmic: pmicgrp {
+ fsl,pins = <
+ MX53_PAD_CSI0_DAT5__GPIO5_23 0x1e4 /* IRQ */
+ >;
+ };
};
};
@@ -38,6 +44,8 @@
pmic: mc34708@8 {
compatible = "fsl,mc34708";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pmic>;
reg = <0x08>;
interrupt-parent = <&gpio5>;
interrupts = <23 0x8>;
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html