From: Changyuan Lyu <changyuanl@xxxxxxxxxx> [ Upstream commit e78276cadb669d3e55cffe66bd166ff3c8572e38 ] Currently, the data flow of the max/min linkrate in the driver is * in pm8001_get_lrate_mode(): hardcoded value ==> struct sas_phy * in pm8001_bytes_dmaed(): struct pm8001_phy ==> struct sas_phy * in pm8001_phy_control(): libsas data ==> struct pm8001_phy Since pm8001_bytes_dmaed() follows pm8001_get_lrate_mode(), and the fields in struct pm8001_phy are not initialized, sysfs `/sys/class/sas_phy/phy-*/maximum_linkrate` always shows `Unknown`. To fix the issue, change the dataflow to the following: * in pm8001_phy_init(): initial value ==> struct pm8001_phy * in pm8001_get_lrate_mode(): struct pm8001_phy ==> struct sas_phy * in pm8001_phy_control(): libsas data ==> struct pm8001_phy For negotiated linkrate, the current dataflow is: * in pm8001_get_lrate_mode(): iomb data ==> struct asd_sas_phy ==> struct sas_phy * in pm8001_bytes_dmaed(): struct asd_sas_phy ==> struct sas_phy Since pm8001_bytes_dmaed() follows pm8001_get_lrate_mode(), the assignment statements in pm8001_bytes_dmaed() are unnecessary and cleaned up. Link: https://lore.kernel.org/r/20220707175210.528858-1-changyuanl@xxxxxxxxxx Reviewed-by: Igor Pylypiv <ipylypiv@xxxxxxxxxx> Acked-by: Jack Wang <jinpu.wang@xxxxxxxxx> Signed-off-by: Changyuan Lyu <changyuanl@xxxxxxxxxx> Signed-off-by: Martin K. Petersen <martin.petersen@xxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- drivers/scsi/pm8001/pm8001_hwi.c | 19 +++---------------- drivers/scsi/pm8001/pm8001_init.c | 2 ++ 2 files changed, 5 insertions(+), 16 deletions(-) diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c index f7466a895d3b..991eb01bb1e0 100644 --- a/drivers/scsi/pm8001/pm8001_hwi.c +++ b/drivers/scsi/pm8001/pm8001_hwi.c @@ -3145,15 +3145,6 @@ void pm8001_bytes_dmaed(struct pm8001_hba_info *pm8001_ha, int i) if (!phy->phy_attached) return; - if (sas_phy->phy) { - struct sas_phy *sphy = sas_phy->phy; - sphy->negotiated_linkrate = sas_phy->linkrate; - sphy->minimum_linkrate = phy->minimum_linkrate; - sphy->minimum_linkrate_hw = SAS_LINK_RATE_1_5_GBPS; - sphy->maximum_linkrate = phy->maximum_linkrate; - sphy->maximum_linkrate_hw = phy->maximum_linkrate; - } - if (phy->phy_type & PORT_TYPE_SAS) { struct sas_identify_frame *id; id = (struct sas_identify_frame *)phy->frame_rcvd; @@ -3177,26 +3168,22 @@ void pm8001_get_lrate_mode(struct pm8001_phy *phy, u8 link_rate) switch (link_rate) { case PHY_SPEED_120: phy->sas_phy.linkrate = SAS_LINK_RATE_12_0_GBPS; - phy->sas_phy.phy->negotiated_linkrate = SAS_LINK_RATE_12_0_GBPS; break; case PHY_SPEED_60: phy->sas_phy.linkrate = SAS_LINK_RATE_6_0_GBPS; - phy->sas_phy.phy->negotiated_linkrate = SAS_LINK_RATE_6_0_GBPS; break; case PHY_SPEED_30: phy->sas_phy.linkrate = SAS_LINK_RATE_3_0_GBPS; - phy->sas_phy.phy->negotiated_linkrate = SAS_LINK_RATE_3_0_GBPS; break; case PHY_SPEED_15: phy->sas_phy.linkrate = SAS_LINK_RATE_1_5_GBPS; - phy->sas_phy.phy->negotiated_linkrate = SAS_LINK_RATE_1_5_GBPS; break; } sas_phy->negotiated_linkrate = phy->sas_phy.linkrate; - sas_phy->maximum_linkrate_hw = SAS_LINK_RATE_6_0_GBPS; + sas_phy->maximum_linkrate_hw = phy->maximum_linkrate; sas_phy->minimum_linkrate_hw = SAS_LINK_RATE_1_5_GBPS; - sas_phy->maximum_linkrate = SAS_LINK_RATE_6_0_GBPS; - sas_phy->minimum_linkrate = SAS_LINK_RATE_1_5_GBPS; + sas_phy->maximum_linkrate = phy->maximum_linkrate; + sas_phy->minimum_linkrate = phy->minimum_linkrate; } /** diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c index 9b04f1a6a67d..01f2f41928eb 100644 --- a/drivers/scsi/pm8001/pm8001_init.c +++ b/drivers/scsi/pm8001/pm8001_init.c @@ -143,6 +143,8 @@ static void pm8001_phy_init(struct pm8001_hba_info *pm8001_ha, int phy_id) struct asd_sas_phy *sas_phy = &phy->sas_phy; phy->phy_state = PHY_LINK_DISABLE; phy->pm8001_ha = pm8001_ha; + phy->minimum_linkrate = SAS_LINK_RATE_1_5_GBPS; + phy->maximum_linkrate = SAS_LINK_RATE_6_0_GBPS; sas_phy->enabled = (phy_id < pm8001_ha->chip->n_phy) ? 1 : 0; sas_phy->class = SAS; sas_phy->iproto = SAS_PROTOCOL_ALL; -- 2.35.1
