From: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
commit f9b11229b79c0fb2100b5bb4628a101b1d37fbf6 upstream.
When console is enabled, univ8250_console_setup() calls
serial8250_console_setup() before .dev is set to uart_port. Therefore,
it will not call pm_runtime_get_sync(). Later, when the actual driver
is going to take over univ8250_console_exit() is called. As .dev is
already set, serial8250_console_exit() makes pm_runtime_put_sync() call
with usage count being zero triggering PM usage count warning
(extra debug for univ8250_console_setup(), univ8250_console_exit(), and
serial8250_register_ports()):
[ 0.068987] univ8250_console_setup ttyS0 nodev
[ 0.499670] printk: console [ttyS0] enabled
[ 0.717955] printk: console [ttyS0] printing thread started
[ 1.960163] serial8250_register_ports assigned dev for ttyS0
[ 1.976830] printk: console [ttyS0] disabled
[ 1.976888] printk: console [ttyS0] printing thread stopped
[ 1.977073] univ8250_console_exit ttyS0 usage:0
[ 1.977075] serial8250 serial8250: Runtime PM usage count underflow!
[ 1.977429] dw-apb-uart.6: ttyS0 at MMIO 0x4010006000 (irq = 33, base_baud = 115200) is a 16550A
[ 1.977812] univ8250_console_setup ttyS0 usage:2
[ 1.978167] printk: console [ttyS0] printing thread started
[ 1.978203] printk: console [ttyS0] enabled
To fix the issue, call pm_runtime_get_sync() in
serial8250_register_ports() as soon as .dev is set for an uart_port
if it has console enabled.
This problem became apparent only recently because 82586a721595 ("PM:
runtime: Avoid device usage count underflows") added the warning
printout. I confirmed this problem also occurs with v5.18 (w/o the
warning printout, obviously).
Fixes: bedb404e91bb ("serial: 8250_port: Don't use power management for kernel console")
Cc: stable <stable@xxxxxxxxxx>
Tested-by: Tony Lindgren <tony@xxxxxxxxxxx>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Reviewed-by: Tony Lindgren <tony@xxxxxxxxxxx>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
Link: https://lore.kernel.org/r/b4f428e9-491f-daf2-2232-819928dc276e@xxxxxxxxxxxxxxx
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/tty/serial/8250/8250_core.c | 4 ++++
drivers/tty/serial/serial_core.c | 5 -----
include/linux/serial_core.h | 5 +++++
3 files changed, 9 insertions(+), 5 deletions(-)
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -23,6 +23,7 @@
#include <linux/sysrq.h>
#include <linux/delay.h>
#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
#include <linux/tty.h>
#include <linux/ratelimit.h>
#include <linux/tty_flip.h>
@@ -561,6 +562,9 @@ serial8250_register_ports(struct uart_dr
up->port.dev = dev;
+ if (uart_console_enabled(&up->port))
+ pm_runtime_get_sync(up->port.dev);
+
serial8250_apply_quirks(up);
uart_add_one_port(drv, &up->port);
}
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -1912,11 +1912,6 @@ static int uart_proc_show(struct seq_fil
}
#endif
-static inline bool uart_console_enabled(struct uart_port *port)
-{
- return uart_console(port) && (port->cons->flags & CON_ENABLED);
-}
-
static void uart_port_spin_lock_init(struct uart_port *port)
{
spin_lock_init(&port->lock);
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -388,6 +388,11 @@ static const bool earlycon_acpi_spcr_ena
static inline int setup_earlycon(char *buf) { return 0; }
#endif
+static inline bool uart_console_enabled(struct uart_port *port)
+{
+ return uart_console(port) && (port->cons->flags & CON_ENABLED);
+}
+
struct uart_port *uart_get_console(struct uart_port *ports, int nr,
struct console *c);
int uart_parse_earlycon(char *p, unsigned char *iotype, resource_size_t *addr,
