commit a96ef8b504efb2ad445dfb6d54f9488c3ddf23d2 upstream. Add Telit FN980 v1 hardware revision: 01:00.0 Unassigned class [ff00]: Qualcomm Device [17cb:0306] Subsystem: Device [1c5d:2000] Signed-off-by: Daniele Palmas <dnlplm@xxxxxxxxx> Reviewed-by: Manivannan Sadhasivam <mani@xxxxxxxxxx> Link: https://lore.kernel.org/r/20220427072648.17635-1-dnlplm@xxxxxxxxx [mani: Added "host" to the subject] Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx> Signed-off-by: Fabio Porcedda <fabio.porcedda@xxxxxxxxx> --- drivers/bus/mhi/host/pci_generic.c | 38 ++++++++++++++++++++++++++++++ 1 file changed, 38 insertions(+) diff --git a/drivers/bus/mhi/host/pci_generic.c b/drivers/bus/mhi/host/pci_generic.c index 541ced27d941..6b27295f566f 100644 --- a/drivers/bus/mhi/host/pci_generic.c +++ b/drivers/bus/mhi/host/pci_generic.c @@ -446,10 +446,48 @@ static const struct mhi_pci_dev_info mhi_sierra_em919x_info = { .sideband_wake = false, }; +static const struct mhi_channel_config mhi_telit_fn980_hw_v1_channels[] = { + MHI_CHANNEL_CONFIG_UL(14, "QMI", 32, 0), + MHI_CHANNEL_CONFIG_DL(15, "QMI", 32, 0), + MHI_CHANNEL_CONFIG_UL(20, "IPCR", 16, 0), + MHI_CHANNEL_CONFIG_DL_AUTOQUEUE(21, "IPCR", 16, 0), + MHI_CHANNEL_CONFIG_HW_UL(100, "IP_HW0", 128, 1), + MHI_CHANNEL_CONFIG_HW_DL(101, "IP_HW0", 128, 2), +}; + +static struct mhi_event_config mhi_telit_fn980_hw_v1_events[] = { + MHI_EVENT_CONFIG_CTRL(0, 128), + MHI_EVENT_CONFIG_HW_DATA(1, 1024, 100), + MHI_EVENT_CONFIG_HW_DATA(2, 2048, 101) +}; + +static struct mhi_controller_config modem_telit_fn980_hw_v1_config = { + .max_channels = 128, + .timeout_ms = 20000, + .num_channels = ARRAY_SIZE(mhi_telit_fn980_hw_v1_channels), + .ch_cfg = mhi_telit_fn980_hw_v1_channels, + .num_events = ARRAY_SIZE(mhi_telit_fn980_hw_v1_events), + .event_cfg = mhi_telit_fn980_hw_v1_events, +}; + +static const struct mhi_pci_dev_info mhi_telit_fn980_hw_v1_info = { + .name = "telit-fn980-hwv1", + .fw = "qcom/sdx55m/sbl1.mbn", + .edl = "qcom/sdx55m/edl.mbn", + .config = &modem_telit_fn980_hw_v1_config, + .bar_num = MHI_PCI_DEFAULT_BAR_NUM, + .dma_data_width = 32, + .mru_default = 32768, + .sideband_wake = false, +}; + static const struct pci_device_id mhi_pci_id_table[] = { /* EM919x (sdx55), use the same vid:pid as qcom-sdx55m */ { PCI_DEVICE_SUB(PCI_VENDOR_ID_QCOM, 0x0306, 0x18d7, 0x0200), .driver_data = (kernel_ulong_t) &mhi_sierra_em919x_info }, + /* Telit FN980 hardware revision v1 */ + { PCI_DEVICE_SUB(PCI_VENDOR_ID_QCOM, 0x0306, 0x1C5D, 0x2000), + .driver_data = (kernel_ulong_t) &mhi_telit_fn980_hw_v1_info }, { PCI_DEVICE(PCI_VENDOR_ID_QCOM, 0x0306), .driver_data = (kernel_ulong_t) &mhi_qcom_sdx55_info }, { PCI_DEVICE(PCI_VENDOR_ID_QCOM, 0x0304), -- 2.37.1