Re: [PATCH v2] Subject: x86/PAT: Report PAT on CPUs that support PAT without MTRR

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 13.07.2022 10:51, Chuck Zmudzinski wrote:
> On 7/13/22 2:18 AM, Jan Beulich wrote:
>> On 13.07.2022 03:36, Chuck Zmudzinski wrote:
>>> v2: *Add force_pat_disabled variable to fix "nopat" on Xen PV (Jan Beulich)
>>>     *Add the necessary code to incorporate the "nopat" fix
>>>     *void init_cache_modes(void) -> void __init init_cache_modes(void)
>>>     *Add Jan Beulich as Co-developer (Jan has not signed off yet)
>>>     *Expand the commit message to include relevant parts of the commit
>>>      message of Jan Beulich's proposed patch for this problem
>>>     *Fix 'else if ... {' placement and indentation
>>>     *Remove indication the backport to stable branches is only back to 5.17.y
>>>
>>> I think these changes address all the comments on the original patch
>>>
>>> I added Jan Beulich as a Co-developer because Juergen Gross asked me to
>>> include Jan's idea for fixing "nopat" that was missing from the first
>>> version of the patch.
>>
>> You've sufficiently altered this change to clearly no longer want my
>> S-o-b; unfortunately in fact I think you broke things:
> 
> Well, I hope we can come to an agreement so I have
> your S-o-b. But that would probably require me to remove
> Juergen's R-b.
> 
>>> @@ -292,7 +294,7 @@ void init_cache_modes(void)
>>>  		rdmsrl(MSR_IA32_CR_PAT, pat);
>>>  	}
>>>  
>>> -	if (!pat) {
>>> +	if (!pat || pat_force_disabled) {
>>
>> By checking the new variable here ...
>>
>>>  		/*
>>>  		 * No PAT. Emulate the PAT table that corresponds to the two
>>>  		 * cache bits, PWT (Write Through) and PCD (Cache Disable).
>>> @@ -313,6 +315,16 @@ void init_cache_modes(void)
>>>  		 */
>>>  		pat = PAT(0, WB) | PAT(1, WT) | PAT(2, UC_MINUS) | PAT(3, UC) |
>>>  		      PAT(4, WB) | PAT(5, WT) | PAT(6, UC_MINUS) | PAT(7, UC);
>>
>> ... you put in place a software view which doesn't match hardware. I
>> continue to think that ...
>>
>>> +	} else if (!pat_bp_enabled) {
>>
>> ... the variable wants checking here instead (at which point, yes,
>> this comes quite close to simply being a v2 of my original patch).
>>
>> By using !pat_bp_enabled here you actually broaden where the change
>> would take effect. Iirc Boris had asked to narrow things (besides
>> voicing opposition to this approach altogether). Even without that
>> request I wonder whether you aren't going to far with this.
>>
>> Jan
> 
> I thought about checking for the administrator's "nopat"
> setting where you suggest which would limit the effect
> of "nopat" to not reporting PAT as enabled to device
> drivers who query for PAT availability using pat_enabled().
> The main reason I did not do that is that due to the fact
> that we cannot write to the PAT MSR, we cannot really
> disable PAT. But we come closer to respecting the wishes
> of the administrator by configuring the caching modes as
> if PAT is actually disabled by the hardware or firmware
> when in fact it is not.
> 
> What would you propose logging as a message when
> we report PAT as disabled via pat_enabled()? The main
> reason I did not choose to check the new variable in the
> new 'else if' block is that I could not figure out what to
> tell the administrator in that case. I think we would have
> to log something like, "nopat is set, but we cannot disable
> PAT, doing our best to disable PAT by not reporting PAT
> as enabled via pat_enabled(), but that does not guarantee
> that kernel drivers and components cannot use PAT if they
> query for PAT support using boot_cpu_has(X86_FEATURE_PAT)
> instead of pat_enabled()." However, I acknowledge WC mappings
> would still be disabled because arch_can_pci_mmap_wc() will
> be false if pat_enabled() is false.
> 
> Perhaps we also need to log something if we keep the
> check for "nopat" where I placed it. We could say something
> like: "nopat is set, but we cannot disable hardware/firmware
> PAT support, so we are emulating as if there is no PAT support
> which puts in place a software view that does not match
> hardware."
> 
> No matter what, because we cannot write to PAT MSR in
> the Xen PV case, we probably need to log something to
> explain the problems associated with trying to honor the
> administrator's request. Also, what log level should it be.
> Should it be a pr_warn instead of a pr_info?

I'm afraid I'm the wrong one to answer logging questions. As you
can see from my original patch, I didn't add any new logging (and
no addition was requested in the comments that I have got). I also
don't think "nopat" has ever meant "disable PAT", as the feature
is either there or not. Instead I think it was always seen as
"disable fiddling with PAT", which by implication means using
whatever is there (if the feature / MSR itself is available).

Jan



[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux