From: Peng Fan <peng.fan@xxxxxxx> [ Upstream commit b838582ab8d5fb11b2c0275056a9f34e1d94fece ] 0x19 is not a valid setting. According to RM bit layout, BIT3 and BIT0 are reserved. 8 7 6 5 4 3 2 1 0 PE HYS PUE ODE FSEL X DSE X Correct setting with PE PUE set, DSE set to 0. Fixes: 50d336b12f34 ("arm64: dts: imx8mp-evk: Add GPIO LED support") Signed-off-by: Peng Fan <peng.fan@xxxxxxx> Reviewed-by: Rasmus Villemoes <rasmus.villemoes@xxxxxxxxx> Signed-off-by: Shawn Guo <shawnguo@xxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts index 5011adb5ff1f..c0663a6c8376 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts @@ -148,7 +148,7 @@ pinctrl_gpio_led: gpioledgrp { fsl,pins = < - MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16 0x19 + MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16 0x140 >; }; -- 2.35.1