[PATCH 5.10 05/55] can: gs_usb: gs_usb_open/close(): fix memory leak

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Rhett Aultman <rhett.aultman@xxxxxxxxxxx>

commit 2bda24ef95c0311ab93bda00db40486acf30bd0a upstream.

The gs_usb driver appears to suffer from a malady common to many USB
CAN adapter drivers in that it performs usb_alloc_coherent() to
allocate a number of USB request blocks (URBs) for RX, and then later
relies on usb_kill_anchored_urbs() to free them, but this doesn't
actually free them. As a result, this may be leaking DMA memory that's
been used by the driver.

This commit is an adaptation of the techniques found in the esd_usb2
driver where a similar design pattern led to a memory leak. It
explicitly frees the RX URBs and their DMA memory via a call to
usb_free_coherent(). Since the RX URBs were allocated in the
gs_can_open(), we remove them in gs_can_close() rather than in the
disconnect function as was done in esd_usb2.

For more information, see the 928150fad41b ("can: esd_usb2: fix memory
leak").

Link: https://lore.kernel.org/all/alpine.DEB.2.22.394.2206031547001.1630869@thelappy
Fixes: d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices")
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Rhett Aultman <rhett.aultman@xxxxxxxxxxx>
Signed-off-by: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
 drivers/net/can/usb/gs_usb.c |   23 +++++++++++++++++++++--
 1 file changed, 21 insertions(+), 2 deletions(-)

--- a/drivers/net/can/usb/gs_usb.c
+++ b/drivers/net/can/usb/gs_usb.c
@@ -184,6 +184,8 @@ struct gs_can {
 
 	struct usb_anchor tx_submitted;
 	atomic_t active_tx_urbs;
+	void *rxbuf[GS_MAX_RX_URBS];
+	dma_addr_t rxbuf_dma[GS_MAX_RX_URBS];
 };
 
 /* usb interface struct */
@@ -592,6 +594,7 @@ static int gs_can_open(struct net_device
 		for (i = 0; i < GS_MAX_RX_URBS; i++) {
 			struct urb *urb;
 			u8 *buf;
+			dma_addr_t buf_dma;
 
 			/* alloc rx urb */
 			urb = usb_alloc_urb(0, GFP_KERNEL);
@@ -602,7 +605,7 @@ static int gs_can_open(struct net_device
 			buf = usb_alloc_coherent(dev->udev,
 						 sizeof(struct gs_host_frame),
 						 GFP_KERNEL,
-						 &urb->transfer_dma);
+						 &buf_dma);
 			if (!buf) {
 				netdev_err(netdev,
 					   "No memory left for USB buffer\n");
@@ -610,6 +613,8 @@ static int gs_can_open(struct net_device
 				return -ENOMEM;
 			}
 
+			urb->transfer_dma = buf_dma;
+
 			/* fill, anchor, and submit rx urb */
 			usb_fill_bulk_urb(urb,
 					  dev->udev,
@@ -633,10 +638,17 @@ static int gs_can_open(struct net_device
 					   rc);
 
 				usb_unanchor_urb(urb);
+				usb_free_coherent(dev->udev,
+						  sizeof(struct gs_host_frame),
+						  buf,
+						  buf_dma);
 				usb_free_urb(urb);
 				break;
 			}
 
+			dev->rxbuf[i] = buf;
+			dev->rxbuf_dma[i] = buf_dma;
+
 			/* Drop reference,
 			 * USB core will take care of freeing it
 			 */
@@ -701,13 +713,20 @@ static int gs_can_close(struct net_devic
 	int rc;
 	struct gs_can *dev = netdev_priv(netdev);
 	struct gs_usb *parent = dev->parent;
+	unsigned int i;
 
 	netif_stop_queue(netdev);
 
 	/* Stop polling */
 	parent->active_channels--;
-	if (!parent->active_channels)
+	if (!parent->active_channels) {
 		usb_kill_anchored_urbs(&parent->rx_submitted);
+		for (i = 0; i < GS_MAX_RX_URBS; i++)
+			usb_free_coherent(dev->udev,
+					  sizeof(struct gs_host_frame),
+					  dev->rxbuf[i],
+					  dev->rxbuf_dma[i]);
+	}
 
 	/* Stop sending URBs */
 	usb_kill_anchored_urbs(&dev->tx_submitted);





[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux