From: Stefan Agner <stefan@xxxxxxxx>
commit a6c30873ee4a5cc0549c1973668156381ab2c1c4 upstream
Explicit FPU selection has been introduced in commit 1a6be26d5b1a
("[ARM] Enable VFP to be built when non-VFP capable CPUs are selected")
to make use of assembler mnemonics for VFP instructions.
However, clang currently does not support passing assembler flags
like this and errors out with:
clang-10: error: the clang compiler does not support '-Wa,-mfpu=softvfp+vfp'
Make use of the .fpu assembler directives to select the floating point
hardware selectively. Also use the new unified assembler language
mnemonics. This allows to build these procedures with Clang.
Link: https://github.com/ClangBuiltLinux/linux/issues/762
Signed-off-by: Stefan Agner <stefan@xxxxxxxx>
Signed-off-by: Russell King <rmk+kernel@xxxxxxxxxxxxxxx>
Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
arch/arm/vfp/Makefile | 2 --
arch/arm/vfp/vfphw.S | 30 ++++++++++++++++++++----------
2 files changed, 20 insertions(+), 12 deletions(-)
--- a/arch/arm/vfp/Makefile
+++ b/arch/arm/vfp/Makefile
@@ -8,6 +8,4 @@
# ccflags-y := -DDEBUG
# asflags-y := -DDEBUG
-KBUILD_AFLAGS :=$(KBUILD_AFLAGS:-msoft-float=-Wa,-mfpu=softvfp+vfp -mfloat-abi=soft)
-
obj-y += vfpmodule.o entry.o vfphw.o vfpsingle.o vfpdouble.o
--- a/arch/arm/vfp/vfphw.S
+++ b/arch/arm/vfp/vfphw.S
@@ -253,11 +253,14 @@ vfp_current_hw_state_address:
ENTRY(vfp_get_float)
tbl_branch r0, r3, #3
+ .fpu vfpv2
.irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
-1: mrc p10, 0, r0, c\dr, c0, 0 @ fmrs r0, s0
+1: vmov r0, s\dr
ret lr
.org 1b + 8
-1: mrc p10, 0, r0, c\dr, c0, 4 @ fmrs r0, s1
+ .endr
+ .irp dr,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31
+1: vmov r0, s\dr
ret lr
.org 1b + 8
.endr
@@ -265,11 +268,14 @@ ENDPROC(vfp_get_float)
ENTRY(vfp_put_float)
tbl_branch r1, r3, #3
+ .fpu vfpv2
.irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
-1: mcr p10, 0, r0, c\dr, c0, 0 @ fmsr r0, s0
+1: vmov s\dr, r0
ret lr
.org 1b + 8
-1: mcr p10, 0, r0, c\dr, c0, 4 @ fmsr r0, s1
+ .endr
+ .irp dr,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31
+1: vmov s\dr, r0
ret lr
.org 1b + 8
.endr
@@ -277,15 +283,17 @@ ENDPROC(vfp_put_float)
ENTRY(vfp_get_double)
tbl_branch r0, r3, #3
+ .fpu vfpv2
.irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
-1: fmrrd r0, r1, d\dr
+1: vmov r0, r1, d\dr
ret lr
.org 1b + 8
.endr
#ifdef CONFIG_VFPv3
@ d16 - d31 registers
- .irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
-1: mrrc p11, 3, r0, r1, c\dr @ fmrrd r0, r1, d\dr
+ .fpu vfpv3
+ .irp dr,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31
+1: vmov r0, r1, d\dr
ret lr
.org 1b + 8
.endr
@@ -299,15 +307,17 @@ ENDPROC(vfp_get_double)
ENTRY(vfp_put_double)
tbl_branch r2, r3, #3
+ .fpu vfpv2
.irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
-1: fmdrr d\dr, r0, r1
+1: vmov d\dr, r0, r1
ret lr
.org 1b + 8
.endr
#ifdef CONFIG_VFPv3
+ .fpu vfpv3
@ d16 - d31 registers
- .irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
-1: mcrr p11, 3, r0, r1, c\dr @ fmdrr r0, r1, d\dr
+ .irp dr,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31
+1: vmov d\dr, r0, r1
ret lr
.org 1b + 8
.endr
