[PATCH stable 5.15] net: mscc: ocelot: allow unregistered IP multicast flooding to CPU

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Since commit 4cf35a2b627a ("net: mscc: ocelot: fix broken IP multicast
flooding") from v5.12, unregistered IP multicast flooding is
configurable in the ocelot driver for bridged ports. However, by writing
0 to the PGID_MCIPV4 and PGID_MCIPV6 port masks at initialization time,
the CPU port module, for which ocelot_port_set_mcast_flood() is not
called, will have unknown IP multicast flooding disabled.

This makes it impossible for an application such as smcroute to work
properly, since all IP multicast traffic received on a standalone port
is treated as unregistered (and dropped).

Starting with commit 7569459a52c9 ("net: dsa: manage flooding on the CPU
ports"), the limitation above has been lifted, because when standalone
ports become IFF_PROMISC or IFF_ALLMULTI, ocelot_port_set_mcast_flood()
would be called on the CPU port module, so unregistered multicast is
flooded to the CPU on an as-needed basis.

But between v5.12 and v5.18, IP multicast flooding to the CPU has
remained broken, promiscuous or not.

Delete the inexplicable premature optimization of clearing PGID_MCIPV4
and PGID_MCIPV6 as part of the init sequence, and allow unregistered IP
multicast to be flooded freely to the CPU port module.

Fixes: a556c76adc05 ("net: mscc: Add initial Ocelot switch support")
Cc: stable@xxxxxxxxxx
Signed-off-by: Vladimir Oltean <vladimir.oltean@xxxxxxx>
---
 drivers/net/ethernet/mscc/ocelot.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/mscc/ocelot.c b/drivers/net/ethernet/mscc/ocelot.c
index a59300d9e000..96b1e394a397 100644
--- a/drivers/net/ethernet/mscc/ocelot.c
+++ b/drivers/net/ethernet/mscc/ocelot.c
@@ -2206,11 +2206,15 @@ int ocelot_init(struct ocelot *ocelot)
 	ocelot_rmw_rix(ocelot, ANA_PGID_PGID_PGID(BIT(ocelot->num_phys_ports)),
 		       ANA_PGID_PGID_PGID(BIT(ocelot->num_phys_ports)),
 		       ANA_PGID_PGID, PGID_MC);
+	ocelot_rmw_rix(ocelot, ANA_PGID_PGID_PGID(BIT(ocelot->num_phys_ports)),
+		       ANA_PGID_PGID_PGID(BIT(ocelot->num_phys_ports)),
+		       ANA_PGID_PGID, PGID_MCIPV4);
+	ocelot_rmw_rix(ocelot, ANA_PGID_PGID_PGID(BIT(ocelot->num_phys_ports)),
+		       ANA_PGID_PGID_PGID(BIT(ocelot->num_phys_ports)),
+		       ANA_PGID_PGID, PGID_MCIPV6);
 	ocelot_rmw_rix(ocelot, ANA_PGID_PGID_PGID(BIT(ocelot->num_phys_ports)),
 		       ANA_PGID_PGID_PGID(BIT(ocelot->num_phys_ports)),
 		       ANA_PGID_PGID, PGID_BC);
-	ocelot_write_rix(ocelot, 0, ANA_PGID_PGID, PGID_MCIPV4);
-	ocelot_write_rix(ocelot, 0, ANA_PGID_PGID, PGID_MCIPV6);
 
 	/* Allow manual injection via DEVCPU_QS registers, and byte swap these
 	 * registers endianness.
-- 
2.25.1




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux