[PATCH 5.18 055/181] phy: aquantia: Fix AN when higher speeds than 1G are not advertised

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Claudiu Manoil <claudiu.manoil@xxxxxxx>

[ Upstream commit 9b7fd1670a94a57d974795acebde843a5c1a354e ]

Even when the eth port is resticted to work with speeds not higher than 1G,
and so the eth driver is requesting the phy (via phylink) to advertise up
to 1000BASET support, the aquantia phy device is still advertising for 2.5G
and 5G speeds.
Clear these advertising defaults when requested.

Cc: Ondrej Spacek <ondrej.spacek@xxxxxxx>
Fixes: 09c4c57f7bc41 ("net: phy: aquantia: add support for auto-negotiation configuration")
Signed-off-by: Claudiu Manoil <claudiu.manoil@xxxxxxx>
Link: https://lore.kernel.org/r/20220610084037.7625-1-claudiu.manoil@xxxxxxx
Signed-off-by: Jakub Kicinski <kuba@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/net/phy/aquantia_main.c | 15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)

diff --git a/drivers/net/phy/aquantia_main.c b/drivers/net/phy/aquantia_main.c
index a8db1a19011b..c7047f5d7a9b 100644
--- a/drivers/net/phy/aquantia_main.c
+++ b/drivers/net/phy/aquantia_main.c
@@ -34,6 +34,8 @@
 #define MDIO_AN_VEND_PROV			0xc400
 #define MDIO_AN_VEND_PROV_1000BASET_FULL	BIT(15)
 #define MDIO_AN_VEND_PROV_1000BASET_HALF	BIT(14)
+#define MDIO_AN_VEND_PROV_5000BASET_FULL	BIT(11)
+#define MDIO_AN_VEND_PROV_2500BASET_FULL	BIT(10)
 #define MDIO_AN_VEND_PROV_DOWNSHIFT_EN		BIT(4)
 #define MDIO_AN_VEND_PROV_DOWNSHIFT_MASK	GENMASK(3, 0)
 #define MDIO_AN_VEND_PROV_DOWNSHIFT_DFLT	4
@@ -231,9 +233,20 @@ static int aqr_config_aneg(struct phy_device *phydev)
 			      phydev->advertising))
 		reg |= MDIO_AN_VEND_PROV_1000BASET_HALF;
 
+	/* Handle the case when the 2.5G and 5G speeds are not advertised */
+	if (linkmode_test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
+			      phydev->advertising))
+		reg |= MDIO_AN_VEND_PROV_2500BASET_FULL;
+
+	if (linkmode_test_bit(ETHTOOL_LINK_MODE_5000baseT_Full_BIT,
+			      phydev->advertising))
+		reg |= MDIO_AN_VEND_PROV_5000BASET_FULL;
+
 	ret = phy_modify_mmd_changed(phydev, MDIO_MMD_AN, MDIO_AN_VEND_PROV,
 				     MDIO_AN_VEND_PROV_1000BASET_HALF |
-				     MDIO_AN_VEND_PROV_1000BASET_FULL, reg);
+				     MDIO_AN_VEND_PROV_1000BASET_FULL |
+				     MDIO_AN_VEND_PROV_2500BASET_FULL |
+				     MDIO_AN_VEND_PROV_5000BASET_FULL, reg);
 	if (ret < 0)
 		return ret;
 	if (ret > 0)
-- 
2.35.1






[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux