Some jmicron uas chipsets act up (they disconnect from the bus) when sending
more then 32 commands to them at once.
Rather then building an ever growing list with usb-id based quirks for
devices using this chipset, simply reduce the qdepth to 32 when connected
over usb-2. 32 should be plenty to keep things close to maximum
possible throughput on usb-2.
Cc: stable@xxxxxxxxxxxxxxx
Tested-and-reported-by: Laszlo T. <tlacix@xxxxxxxxx>
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
drivers/usb/storage/uas.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/storage/uas.c b/drivers/usb/storage/uas.c
index 511b229..3f42785 100644
--- a/drivers/usb/storage/uas.c
+++ b/drivers/usb/storage/uas.c
@@ -1026,7 +1026,7 @@ static int uas_configure_endpoints(struct uas_dev_info *devinfo)
usb_endpoint_num(&eps[3]->desc));
if (udev->speed != USB_SPEED_SUPER) {
- devinfo->qdepth = 256;
+ devinfo->qdepth = 32;
devinfo->use_streams = 0;
} else {
devinfo->qdepth = usb_alloc_streams(devinfo->intf, eps + 1,
--
2.0.3
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html