[PATCH 2/4] xhci: turn off port power in shutdown

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



If ports are not turned off in shutdown then runtime suspended
self-powered USB devices may survive in U3 link state over S5.

During subsequent boot, if firmware sends an IPC command to program
the port in DISCONNECT state, it will time out, causing significant
delay in the boot time.

Turning off roothub port power is also recommended in xhci
specification 4.19.4 "Port Power" in the additional note.

Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
---
 drivers/usb/host/xhci-hub.c |  2 +-
 drivers/usb/host/xhci.c     | 15 +++++++++++++--
 drivers/usb/host/xhci.h     |  2 ++
 3 files changed, 16 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index c54f2bc23d3f..0fdc014c9401 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -652,7 +652,7 @@ struct xhci_hub *xhci_get_rhub(struct usb_hcd *hcd)
  * It will release and re-aquire the lock while calling ACPI
  * method.
  */
-static void xhci_set_port_power(struct xhci_hcd *xhci, struct usb_hcd *hcd,
+void xhci_set_port_power(struct xhci_hcd *xhci, struct usb_hcd *hcd,
 				u16 index, bool on, unsigned long *flags)
 	__must_hold(&xhci->lock)
 {
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index cb99bed5f755..65858f607437 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -791,6 +791,8 @@ static void xhci_stop(struct usb_hcd *hcd)
 void xhci_shutdown(struct usb_hcd *hcd)
 {
 	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+	unsigned long flags;
+	int i;
 
 	if (xhci->quirks & XHCI_SPURIOUS_REBOOT)
 		usb_disable_xhci_ports(to_pci_dev(hcd->self.sysdev));
@@ -806,12 +808,21 @@ void xhci_shutdown(struct usb_hcd *hcd)
 		del_timer_sync(&xhci->shared_hcd->rh_timer);
 	}
 
-	spin_lock_irq(&xhci->lock);
+	spin_lock_irqsave(&xhci->lock, flags);
 	xhci_halt(xhci);
+
+	/* Power off USB2 ports*/
+	for (i = 0; i < xhci->usb2_rhub.num_ports; i++)
+		xhci_set_port_power(xhci, xhci->main_hcd, i, false, &flags);
+
+	/* Power off USB3 ports*/
+	for (i = 0; i < xhci->usb3_rhub.num_ports; i++)
+		xhci_set_port_power(xhci, xhci->shared_hcd, i, false, &flags);
+
 	/* Workaround for spurious wakeups at shutdown with HSW */
 	if (xhci->quirks & XHCI_SPURIOUS_WAKEUP)
 		xhci_reset(xhci, XHCI_RESET_SHORT_USEC);
-	spin_unlock_irq(&xhci->lock);
+	spin_unlock_irqrestore(&xhci->lock, flags);
 
 	xhci_cleanup_msix(xhci);
 
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 0bd76c94a4b1..28aaf031f9a8 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -2196,6 +2196,8 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex,
 int xhci_hub_status_data(struct usb_hcd *hcd, char *buf);
 int xhci_find_raw_port_number(struct usb_hcd *hcd, int port1);
 struct xhci_hub *xhci_get_rhub(struct usb_hcd *hcd);
+void xhci_set_port_power(struct xhci_hcd *xhci, struct usb_hcd *hcd, u16 index,
+			 bool on, unsigned long *flags);
 
 void xhci_hc_died(struct xhci_hcd *xhci);
 
-- 
2.25.1




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux