From: "Hung, Cruise" <Cruise.Hung@xxxxxxx>
[ Upstream commit 6ecf9773a5030aa4932096754bacff20e1b944b8 ]
[Why]
DMUB Outbox0 read/write pointer not sync after resumed from S4.
And that caused old traces were sent to outbox.
[How]
Disable DMUB Outbox0 interrupt
and clear DMUB Outbox0 read/write pointer when resumes from S4.
And then enable Outbox0 interrupt before starts DMCUB.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@xxxxxxx>
Acked-by: Jasdeep Dhillon <jdhillon@xxxxxxx>
Tested-by: Daniel Wheeler <daniel.wheeler@xxxxxxx>
Signed-off-by: Cruise Hung <Cruise.Hung@xxxxxxx>
Signed-off-by: Alex Deucher <alexander.deucher@xxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
.../gpu/drm/amd/display/dc/dcn31/dcn31_dccg.c | 61 +++++++++----------
.../gpu/drm/amd/display/dmub/src/dmub_dcn31.c | 2 +
2 files changed, 31 insertions(+), 32 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_dccg.c b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_dccg.c
index 696c9307715d..f0dc680377be 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_dccg.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_dccg.c
@@ -111,12 +111,10 @@ void dccg31_set_physymclk(
/* Controls the generation of pixel valid for OTG in (OTG -> HPO case) */
void dccg31_set_dtbclk_dto(
struct dccg *dccg,
- int dtbclk_inst,
- int req_dtbclk_khz,
- int num_odm_segments,
- const struct dc_crtc_timing *timing)
+ struct dtbclk_dto_params *params)
{
struct dcn_dccg *dccg_dcn = TO_DCN_DCCG(dccg);
+ int req_dtbclk_khz = params->pixclk_khz;
uint32_t dtbdto_div;
/* Mode DTBDTO Rate DTBCLK_DTO<x>_DIV Register
@@ -127,57 +125,56 @@ void dccg31_set_dtbclk_dto(
* DSC native 4:2:2 pixel rate/2 4
* Other modes pixel rate 8
*/
- if (num_odm_segments == 4) {
+ if (params->num_odm_segments == 4) {
dtbdto_div = 2;
- req_dtbclk_khz = req_dtbclk_khz / 4;
- } else if ((num_odm_segments == 2) ||
- (timing->pixel_encoding == PIXEL_ENCODING_YCBCR420) ||
- (timing->flags.DSC && timing->pixel_encoding == PIXEL_ENCODING_YCBCR422
- && !timing->dsc_cfg.ycbcr422_simple)) {
+ req_dtbclk_khz = params->pixclk_khz / 4;
+ } else if ((params->num_odm_segments == 2) ||
+ (params->timing->pixel_encoding == PIXEL_ENCODING_YCBCR420) ||
+ (params->timing->flags.DSC && params->timing->pixel_encoding == PIXEL_ENCODING_YCBCR422
+ && !params->timing->dsc_cfg.ycbcr422_simple)) {
dtbdto_div = 4;
- req_dtbclk_khz = req_dtbclk_khz / 2;
+ req_dtbclk_khz = params->pixclk_khz / 2;
} else
dtbdto_div = 8;
- if (dccg->ref_dtbclk_khz && req_dtbclk_khz) {
+ if (params->ref_dtbclk_khz && req_dtbclk_khz) {
uint32_t modulo, phase;
// phase / modulo = dtbclk / dtbclk ref
- modulo = dccg->ref_dtbclk_khz * 1000;
- phase = div_u64((((unsigned long long)modulo * req_dtbclk_khz) + dccg->ref_dtbclk_khz - 1),
- dccg->ref_dtbclk_khz);
+ modulo = params->ref_dtbclk_khz * 1000;
+ phase = div_u64((((unsigned long long)modulo * req_dtbclk_khz) + params->ref_dtbclk_khz - 1),
+ params->ref_dtbclk_khz);
- REG_UPDATE(OTG_PIXEL_RATE_CNTL[dtbclk_inst],
- DTBCLK_DTO_DIV[dtbclk_inst], dtbdto_div);
+ REG_UPDATE(OTG_PIXEL_RATE_CNTL[params->otg_inst],
+ DTBCLK_DTO_DIV[params->otg_inst], dtbdto_div);
- REG_WRITE(DTBCLK_DTO_MODULO[dtbclk_inst], modulo);
- REG_WRITE(DTBCLK_DTO_PHASE[dtbclk_inst], phase);
+ REG_WRITE(DTBCLK_DTO_MODULO[params->otg_inst], modulo);
+ REG_WRITE(DTBCLK_DTO_PHASE[params->otg_inst], phase);
- REG_UPDATE(OTG_PIXEL_RATE_CNTL[dtbclk_inst],
- DTBCLK_DTO_ENABLE[dtbclk_inst], 1);
+ REG_UPDATE(OTG_PIXEL_RATE_CNTL[params->otg_inst],
+ DTBCLK_DTO_ENABLE[params->otg_inst], 1);
- REG_WAIT(OTG_PIXEL_RATE_CNTL[dtbclk_inst],
- DTBCLKDTO_ENABLE_STATUS[dtbclk_inst], 1,
+ REG_WAIT(OTG_PIXEL_RATE_CNTL[params->otg_inst],
+ DTBCLKDTO_ENABLE_STATUS[params->otg_inst], 1,
1, 100);
/* The recommended programming sequence to enable DTBCLK DTO to generate
* valid pixel HPO DPSTREAM ENCODER, specifies that DTO source select should
* be set only after DTO is enabled
*/
- REG_UPDATE(OTG_PIXEL_RATE_CNTL[dtbclk_inst],
- PIPE_DTO_SRC_SEL[dtbclk_inst], 1);
-
- dccg->dtbclk_khz[dtbclk_inst] = req_dtbclk_khz;
+ REG_UPDATE(OTG_PIXEL_RATE_CNTL[params->otg_inst],
+ PIPE_DTO_SRC_SEL[params->otg_inst], 1);
} else {
- REG_UPDATE_3(OTG_PIXEL_RATE_CNTL[dtbclk_inst],
- DTBCLK_DTO_ENABLE[dtbclk_inst], 0,
- PIPE_DTO_SRC_SEL[dtbclk_inst], 0,
- DTBCLK_DTO_DIV[dtbclk_inst], dtbdto_div);
+ REG_UPDATE_3(OTG_PIXEL_RATE_CNTL[params->otg_inst],
+ DTBCLK_DTO_ENABLE[params->otg_inst], 0,
+ PIPE_DTO_SRC_SEL[params->otg_inst], 0,
+ DTBCLK_DTO_DIV[params->otg_inst], dtbdto_div);
REG_WRITE(DTBCLK_DTO_MODULO[dtbclk_inst], 0);
REG_WRITE(DTBCLK_DTO_PHASE[dtbclk_inst], 0);
- dccg->dtbclk_khz[dtbclk_inst] = 0;
+ REG_WRITE(DTBCLK_DTO_MODULO[params->otg_inst], 0);
+ REG_WRITE(DTBCLK_DTO_PHASE[params->otg_inst], 0);
}
}
diff --git a/drivers/gpu/drm/amd/display/dmub/src/dmub_dcn31.c b/drivers/gpu/drm/amd/display/dmub/src/dmub_dcn31.c
index fc667cb17eb0..08fa747a7c7d 100644
--- a/drivers/gpu/drm/amd/display/dmub/src/dmub_dcn31.c
+++ b/drivers/gpu/drm/amd/display/dmub/src/dmub_dcn31.c
@@ -125,6 +125,8 @@ void dmub_dcn31_reset(struct dmub_srv *dmub)
REG_WRITE(DMCUB_INBOX1_WPTR, 0);
REG_WRITE(DMCUB_OUTBOX1_RPTR, 0);
REG_WRITE(DMCUB_OUTBOX1_WPTR, 0);
+ REG_WRITE(DMCUB_OUTBOX0_RPTR, 0);
+ REG_WRITE(DMCUB_OUTBOX0_WPTR, 0);
REG_WRITE(DMCUB_SCRATCH0, 0);
/* Clear the GPINT command manually so we don't send anything during boot. */
--
2.35.1
