From: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx> [ Upstream commit 52bb1cb7118564166b04d52387bd8403632f5190 ] Only CS7 and CS8 seem supported but CSIZE is not sanitized from CS5 or CS6 to CS8. In addition, ASC_CTL_MODE_7BIT_PAR suggests that CS7 has to have parity, thus add PARENB. Incorrect CSIZE results in miscalculation of the frame bits in tty_get_char_size() or in its predecessor where the roughly the same code is directly within uart_update_timeout(). Fixes: c4b058560762 (serial:st-asc: Add ST ASC driver.) Cc: Srinivas Kandagatla <srinivas.kandagatla@xxxxxx> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx> Link: https://lore.kernel.org/r/20220519081808.3776-8-ilpo.jarvinen@xxxxxxxxxxxxxxx Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- drivers/tty/serial/st-asc.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/tty/serial/st-asc.c b/drivers/tty/serial/st-asc.c index e7048515a79c..97d36f870f64 100644 --- a/drivers/tty/serial/st-asc.c +++ b/drivers/tty/serial/st-asc.c @@ -535,10 +535,14 @@ static void asc_set_termios(struct uart_port *port, struct ktermios *termios, /* set character length */ if ((cflag & CSIZE) == CS7) { ctrl_val |= ASC_CTL_MODE_7BIT_PAR; + cflag |= PARENB; } else { ctrl_val |= (cflag & PARENB) ? ASC_CTL_MODE_8BIT_PAR : ASC_CTL_MODE_8BIT; + cflag &= ~CSIZE; + cflag |= CS8; } + termios->c_cflag = cflag; /* set stop bit */ ctrl_val |= (cflag & CSTOPB) ? ASC_CTL_STOP_2BIT : ASC_CTL_STOP_1BIT; -- 2.35.1
