From: Josh Poimboeuf <jpoimboe@xxxxxxxxxx>
[ Upstream commit 1d1a0e7c5100d332583e20b40aa8c0a8ed3d7849 ]
There have been some recent reports of faddr2line failures:
$ scripts/faddr2line sound/soundcore.ko sound_devnode+0x5/0x35
bad symbol size: base: 0x0000000000000000 end: 0x0000000000000000
$ ./scripts/faddr2line vmlinux.o enter_from_user_mode+0x24
bad symbol size: base: 0x0000000000005fe0 end: 0x0000000000005fe0
The problem is that faddr2line is based on 'nm', which has a major
limitation: it doesn't know how to distinguish between different text
sections. So if an offset exists in multiple text sections in the
object, it may fail.
Rewrite faddr2line to be section-aware, by basing it on readelf.
Fixes: 67326666e2d4 ("scripts: add script for translating stack dump function offsets")
Reported-by: Kaiwan N Billimoria <kaiwan.billimoria@xxxxxxxxx>
Reported-by: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
Signed-off-by: Josh Poimboeuf <jpoimboe@xxxxxxxxxx>
Link: https://lore.kernel.org/r/29ff99f86e3da965b6e46c1cc2d72ce6528c17c3.1652382321.git.jpoimboe@xxxxxxxxxx
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
scripts/faddr2line | 150 +++++++++++++++++++++++++++++----------------
1 file changed, 97 insertions(+), 53 deletions(-)
diff --git a/scripts/faddr2line b/scripts/faddr2line
index a0149db00be7..226c3f559dc5 100755
--- a/scripts/faddr2line
+++ b/scripts/faddr2line
@@ -44,17 +44,6 @@
set -o errexit
set -o nounset
-READELF="${CROSS_COMPILE:-}readelf"
-ADDR2LINE="${CROSS_COMPILE:-}addr2line"
-SIZE="${CROSS_COMPILE:-}size"
-NM="${CROSS_COMPILE:-}nm"
-
-command -v awk >/dev/null 2>&1 || die "awk isn't installed"
-command -v ${READELF} >/dev/null 2>&1 || die "readelf isn't installed"
-command -v ${ADDR2LINE} >/dev/null 2>&1 || die "addr2line isn't installed"
-command -v ${SIZE} >/dev/null 2>&1 || die "size isn't installed"
-command -v ${NM} >/dev/null 2>&1 || die "nm isn't installed"
-
usage() {
echo "usage: faddr2line [--list] <object file> <func+offset> <func+offset>..." >&2
exit 1
@@ -69,6 +58,14 @@ die() {
exit 1
}
+READELF="${CROSS_COMPILE:-}readelf"
+ADDR2LINE="${CROSS_COMPILE:-}addr2line"
+AWK="awk"
+
+command -v ${AWK} >/dev/null 2>&1 || die "${AWK} isn't installed"
+command -v ${READELF} >/dev/null 2>&1 || die "${READELF} isn't installed"
+command -v ${ADDR2LINE} >/dev/null 2>&1 || die "${ADDR2LINE} isn't installed"
+
# Try to figure out the source directory prefix so we can remove it from the
# addr2line output. HACK ALERT: This assumes that start_kernel() is in
# kernel/init.c! This only works for vmlinux. Otherwise it falls back to
@@ -76,7 +73,7 @@ die() {
find_dir_prefix() {
local objfile=$1
- local start_kernel_addr=$(${READELF} -sW $objfile | awk '$8 == "start_kernel" {printf "0x%s", $2}')
+ local start_kernel_addr=$(${READELF} --symbols --wide $objfile | ${AWK} '$8 == "start_kernel" {printf "0x%s", $2}')
[[ -z $start_kernel_addr ]] && return
local file_line=$(${ADDR2LINE} -e $objfile $start_kernel_addr)
@@ -97,86 +94,133 @@ __faddr2line() {
local dir_prefix=$3
local print_warnings=$4
- local func=${func_addr%+*}
+ local sym_name=${func_addr%+*}
local offset=${func_addr#*+}
offset=${offset%/*}
- local size=
- [[ $func_addr =~ "/" ]] && size=${func_addr#*/}
+ local user_size=
+ [[ $func_addr =~ "/" ]] && user_size=${func_addr#*/}
- if [[ -z $func ]] || [[ -z $offset ]] || [[ $func = $func_addr ]]; then
+ if [[ -z $sym_name ]] || [[ -z $offset ]] || [[ $sym_name = $func_addr ]]; then
warn "bad func+offset $func_addr"
DONE=1
return
fi
# Go through each of the object's symbols which match the func name.
- # In rare cases there might be duplicates.
- file_end=$(${SIZE} -Ax $objfile | awk '$1 == ".text" {print $2}')
- while read symbol; do
- local fields=($symbol)
- local sym_base=0x${fields[0]}
- local sym_type=${fields[1]}
- local sym_end=${fields[3]}
-
- # calculate the size
- local sym_size=$(($sym_end - $sym_base))
+ # In rare cases there might be duplicates, in which case we print all
+ # matches.
+ while read line; do
+ local fields=($line)
+ local sym_addr=0x${fields[1]}
+ local sym_elf_size=${fields[2]}
+ local sym_sec=${fields[6]}
+
+ # Get the section size:
+ local sec_size=$(${READELF} --section-headers --wide $objfile |
+ sed 's/\[ /\[/' |
+ ${AWK} -v sec=$sym_sec '$1 == "[" sec "]" { print "0x" $6; exit }')
+
+ if [[ -z $sec_size ]]; then
+ warn "bad section size: section: $sym_sec"
+ DONE=1
+ return
+ fi
+
+ # Calculate the symbol size.
+ #
+ # Unfortunately we can't use the ELF size, because kallsyms
+ # also includes the padding bytes in its size calculation. For
+ # kallsyms, the size calculation is the distance between the
+ # symbol and the next symbol in a sorted list.
+ local sym_size
+ local cur_sym_addr
+ local found=0
+ while read line; do
+ local fields=($line)
+ cur_sym_addr=0x${fields[1]}
+ local cur_sym_elf_size=${fields[2]}
+ local cur_sym_name=${fields[7]:-}
+
+ if [[ $cur_sym_addr = $sym_addr ]] &&
+ [[ $cur_sym_elf_size = $sym_elf_size ]] &&
+ [[ $cur_sym_name = $sym_name ]]; then
+ found=1
+ continue
+ fi
+
+ if [[ $found = 1 ]]; then
+ sym_size=$(($cur_sym_addr - $sym_addr))
+ [[ $sym_size -lt $sym_elf_size ]] && continue;
+ found=2
+ break
+ fi
+ done < <(${READELF} --symbols --wide $objfile | ${AWK} -v sec=$sym_sec '$7 == sec' | sort --key=2)
+
+ if [[ $found = 0 ]]; then
+ warn "can't find symbol: sym_name: $sym_name sym_sec: $sym_sec sym_addr: $sym_addr sym_elf_size: $sym_elf_size"
+ DONE=1
+ return
+ fi
+
+ # If nothing was found after the symbol, assume it's the last
+ # symbol in the section.
+ [[ $found = 1 ]] && sym_size=$(($sec_size - $sym_addr))
+
if [[ -z $sym_size ]] || [[ $sym_size -le 0 ]]; then
- warn "bad symbol size: base: $sym_base end: $sym_end"
+ warn "bad symbol size: sym_addr: $sym_addr cur_sym_addr: $cur_sym_addr"
DONE=1
return
fi
+
sym_size=0x$(printf %x $sym_size)
- # calculate the address
- local addr=$(($sym_base + $offset))
+ # Calculate the section address from user-supplied offset:
+ local addr=$(($sym_addr + $offset))
if [[ -z $addr ]] || [[ $addr = 0 ]]; then
- warn "bad address: $sym_base + $offset"
+ warn "bad address: $sym_addr + $offset"
DONE=1
return
fi
addr=0x$(printf %x $addr)
- # weed out non-function symbols
- if [[ $sym_type != t ]] && [[ $sym_type != T ]]; then
- [[ $print_warnings = 1 ]] &&
- echo "skipping $func address at $addr due to non-function symbol of type '$sym_type'"
- continue
- fi
-
- # if the user provided a size, make sure it matches the symbol's size
- if [[ -n $size ]] && [[ $size -ne $sym_size ]]; then
+ # If the user provided a size, make sure it matches the symbol's size:
+ if [[ -n $user_size ]] && [[ $user_size -ne $sym_size ]]; then
[[ $print_warnings = 1 ]] &&
- echo "skipping $func address at $addr due to size mismatch ($size != $sym_size)"
+ echo "skipping $sym_name address at $addr due to size mismatch ($user_size != $sym_size)"
continue;
fi
- # make sure the provided offset is within the symbol's range
+ # Make sure the provided offset is within the symbol's range:
if [[ $offset -gt $sym_size ]]; then
[[ $print_warnings = 1 ]] &&
- echo "skipping $func address at $addr due to size mismatch ($offset > $sym_size)"
+ echo "skipping $sym_name address at $addr due to size mismatch ($offset > $sym_size)"
continue
fi
- # separate multiple entries with a blank line
+ # In case of duplicates or multiple addresses specified on the
+ # cmdline, separate multiple entries with a blank line:
[[ $FIRST = 0 ]] && echo
FIRST=0
- # pass real address to addr2line
- echo "$func+$offset/$sym_size:"
- local file_lines=$(${ADDR2LINE} -fpie $objfile $addr | sed "s; $dir_prefix\(\./\)*; ;")
- [[ -z $file_lines ]] && return
+ echo "$sym_name+$offset/$sym_size:"
+ # Pass section address to addr2line and strip absolute paths
+ # from the output:
+ local output=$(${ADDR2LINE} -fpie $objfile $addr | sed "s; $dir_prefix\(\./\)*; ;")
+ [[ -z $output ]] && continue
+
+ # Default output (non --list):
if [[ $LIST = 0 ]]; then
- echo "$file_lines" | while read -r line
+ echo "$output" | while read -r line
do
echo $line
done
DONE=1;
- return
+ continue
fi
- # show each line with context
- echo "$file_lines" | while read -r line
+ # For --list, show each line with its corresponding source code:
+ echo "$output" | while read -r line
do
echo
echo $line
@@ -184,12 +228,12 @@ __faddr2line() {
n1=$[$n-5]
n2=$[$n+5]
f=$(echo $line | sed 's/.*at \(.\+\):.*/\1/g')
- awk 'NR>=strtonum("'$n1'") && NR<=strtonum("'$n2'") { if (NR=='$n') printf(">%d<", NR); else printf(" %d ", NR); printf("\t%s\n", $0)}' $f
+ ${AWK} 'NR>=strtonum("'$n1'") && NR<=strtonum("'$n2'") { if (NR=='$n') printf(">%d<", NR); else printf(" %d ", NR); printf("\t%s\n", $0)}' $f
done
DONE=1
- done < <(${NM} -n $objfile | awk -v fn=$func -v end=$file_end '$3 == fn { found=1; line=$0; start=$1; next } found == 1 { found=0; print line, "0x"$1 } END {if (found == 1) print line, end; }')
+ done < <(${READELF} --symbols --wide $objfile | ${AWK} -v fn=$sym_name '$4 == "FUNC" && $8 == fn')
}
[[ $# -lt 2 ]] && usage
--
2.35.1
