From: Marek Vasut <marex@xxxxxxx>
[ Upstream commit ef2d90708883f4025a801feb0ba8411a7a4387e1 ]
Per KSZ9031RNX PHY datasheet FIGURE 7-5: POWER-UP/POWER-DOWN/RESET TIMING
Note 2: After the de-assertion of reset, wait a minimum of 100 μs before
starting programming on the MIIM (MDC/MDIO) interface.
Add 1ms post-reset delay to guarantee this figure.
Fixes: 010ca9fe500bf ("ARM: dts: stm32: Add missing ethernet PHY reset on AV96")
Signed-off-by: Marek Vasut <marex@xxxxxxx>
Cc: Alexandre Torgue <alexandre.torgue@xxxxxxxxxxx>
Cc: Patrice Chotard <patrice.chotard@xxxxxxxxxxx>
Cc: Patrick Delaunay <patrick.delaunay@xxxxxxxxxxx>
Cc: linux-stm32@xxxxxxxxxxxxxxxxxxxxxxxxxxxx
To: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
Signed-off-by: Alexandre Torgue <alexandre.torgue@xxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi
index 6885948f3024..8eb51d84b698 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi
@@ -141,6 +141,7 @@
compatible = "snps,dwmac-mdio";
reset-gpios = <&gpioz 2 GPIO_ACTIVE_LOW>;
reset-delay-us = <1000>;
+ reset-post-delay-us = <1000>;
phy0: ethernet-phy@7 {
reg = <7>;
--
2.35.1
