From: Thorsten Scherer <t.scherer@xxxxxxxxxxxx> [ Upstream commit 3d397a1277853498e8b7b305f2610881357c033f ] Commit f3e7dae323ab ("ARM: dts: imx6qdl: add enet_out clk support") added another item to the list of clocks for the fec device. As imx6dl-eckelmann-ci4x10.dts only overwrites clocks, but not clock-names this resulted in an inconsistency with clocks having one item more than clock-names. Also overwrite clock-names with the same value as in imx6qdl.dtsi. This is a no-op today, but prevents similar inconsistencies if the soc file will be changed in a similar way in the future. Signed-off-by: Thorsten Scherer <t.scherer@xxxxxxxxxxxx> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx> Fixes: f3e7dae323ab ("ARM: dts: imx6qdl: add enet_out clk support") Signed-off-by: Shawn Guo <shawnguo@xxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts b/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts index b4a9523e325b..864dc5018451 100644 --- a/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts +++ b/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts @@ -297,7 +297,11 @@ phy-mode = "rmii"; phy-reset-gpios = <&gpio1 18 GPIO_ACTIVE_LOW>; phy-handle = <&phy>; - clocks = <&clks IMX6QDL_CLK_ENET>, <&clks IMX6QDL_CLK_ENET>, <&rmii_clk>; + clocks = <&clks IMX6QDL_CLK_ENET>, + <&clks IMX6QDL_CLK_ENET>, + <&rmii_clk>, + <&clks IMX6QDL_CLK_ENET_REF>; + clock-names = "ipg", "ahb", "ptp", "enet_out"; status = "okay"; mdio { -- 2.35.1