From: Rafał Miłecki <rafal@xxxxxxxxxx>
[ Upstream commit 31fd9b79dc580301c53a001482755ba7e88c2809 ]
This describes CRU in a way matching documentation and fixes:
arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dt.yaml: cru@100: $nodename:0: 'cru@100' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
From schema: /lib/python3.6/site-packages/dtschema/schemas/simple-bus.yaml
Signed-off-by: Rafał Miłecki <rafal@xxxxxxxxxx>
Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
arch/arm/boot/dts/bcm5301x.dtsi | 13 +++++++++----
1 file changed, 9 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
index f69d2af3c1fa..db8c3f684786 100644
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -423,14 +423,14 @@
#address-cells = <1>;
#size-cells = <1>;
- cru@100 {
- compatible = "simple-bus";
+ cru-bus@100 {
+ compatible = "brcm,ns-cru", "simple-mfd";
reg = <0x100 0x1a4>;
ranges;
#address-cells = <1>;
#size-cells = <1>;
- lcpll0: lcpll0@100 {
+ lcpll0: clock-controller@100 {
#clock-cells = <1>;
compatible = "brcm,nsp-lcpll0";
reg = <0x100 0x14>;
@@ -439,7 +439,7 @@
"sdio", "ddr_phy";
};
- genpll: genpll@140 {
+ genpll: clock-controller@140 {
#clock-cells = <1>;
compatible = "brcm,nsp-genpll";
reg = <0x140 0x24>;
@@ -450,6 +450,11 @@
"sata1", "sata2";
};
+ syscon@180 {
+ compatible = "brcm,cru-clkset", "syscon";
+ reg = <0x180 0x4>;
+ };
+
pinctrl: pin-controller@1c0 {
compatible = "brcm,bcm4708-pinmux";
reg = <0x1c0 0x24>;
--
2.35.1
