From: Tyler Hicks <tyhicks@xxxxxxxxxxxxxxxxxxx> [ Upstream commit ad2df24732e8956a45a00894d2163c4ee8fb0e1f ] The dmc520 driver requires that at least one interrupt line, out of the ten possible, is configured. The driver prints an error and returns -EINVAL from its .probe function if there are no interrupt lines configured. Don't print a KERN_ERR level message for each interrupt line that's unconfigured as that can confuse users into thinking that there is an error condition. Before this change, the following KERN_ERR level messages would be reported if only dram_ecc_errc and dram_ecc_errd were configured in the device tree: dmc520 68000000.dmc: IRQ ram_ecc_errc not found dmc520 68000000.dmc: IRQ ram_ecc_errd not found dmc520 68000000.dmc: IRQ failed_access not found dmc520 68000000.dmc: IRQ failed_prog not found dmc520 68000000.dmc: IRQ link_err not dmc520 68000000.dmc: IRQ temperature_event not found dmc520 68000000.dmc: IRQ arch_fsm not found dmc520 68000000.dmc: IRQ phy_request not found Fixes: 1088750d7839 ("EDAC: Add EDAC driver for DMC520") Reported-by: Sinan Kaya <okaya@xxxxxxxxxx> Signed-off-by: Tyler Hicks <tyhicks@xxxxxxxxxxxxxxxxxxx> Signed-off-by: Borislav Petkov <bp@xxxxxxx> Link: https://lore.kernel.org/r/20220111163800.22362-1-tyhicks@xxxxxxxxxxxxxxxxxxx Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- drivers/edac/dmc520_edac.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/edac/dmc520_edac.c b/drivers/edac/dmc520_edac.c index b8a7d9594afd..1fa5ca57e9ec 100644 --- a/drivers/edac/dmc520_edac.c +++ b/drivers/edac/dmc520_edac.c @@ -489,7 +489,7 @@ static int dmc520_edac_probe(struct platform_device *pdev) dev = &pdev->dev; for (idx = 0; idx < NUMBER_OF_IRQS; idx++) { - irq = platform_get_irq_byname(pdev, dmc520_irq_configs[idx].name); + irq = platform_get_irq_byname_optional(pdev, dmc520_irq_configs[idx].name); irqs[idx] = irq; masks[idx] = dmc520_irq_configs[idx].mask; if (irq >= 0) { -- 2.35.1