From: Vijaya Krishna Nivarthi <quic_vnivarth@xxxxxxxxxxx> [ Upstream commit 3d0e375bae55c2dfa6dd0762f45ad71f0b192f71 ] WLAN rail was leaking power during RBSC/sleep even after turning BT off. Change active and sleep pinctrl configurations to handle same. Signed-off-by: Vijaya Krishna Nivarthi <quic_vnivarth@xxxxxxxxxxx> Reviewed-by: Douglas Anderson <dianders@xxxxxxxxxxxx> Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx> Link: https://lore.kernel.org/r/1650556567-4995-3-git-send-email-quic_vnivarth@xxxxxxxxxxx Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi | 19 ++++++++++++++----- 1 file changed, 14 insertions(+), 5 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi index b833ba1e8f4a..98b5cd70bca5 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi @@ -398,8 +398,14 @@ &qup_i2c13_data_clk { /* For mos_bt_uart */ &qup_uart7_cts { - /* Configure a pull-down on CTS to match the pull of the Bluetooth module. */ - bias-pull-down; + /* + * Configure a bias-bus-hold on CTS to lower power + * usage when Bluetooth is turned off. Bus hold will + * maintain a low power state regardless of whether + * the Bluetooth module drives the pin in either + * direction or leaves the pin fully unpowered. + */ + bias-bus-hold; }; /* For mos_bt_uart */ @@ -490,10 +496,13 @@ qup_uart7_sleep_cts: qup-uart7-sleep-cts { pins = "gpio28"; function = "gpio"; /* - * Configure a pull-down on CTS to match the pull of - * the Bluetooth module. + * Configure a bias-bus-hold on CTS to lower power + * usage when Bluetooth is turned off. Bus hold will + * maintain a low power state regardless of whether + * the Bluetooth module drives the pin in either + * direction or leaves the pin fully unpowered. */ - bias-pull-down; + bias-bus-hold; }; /* For mos_bt_uart */ -- 2.35.1
