[PATCH AUTOSEL 5.17 007/135] ath11k: Change max no of active probe SSID and BSSID to fw capability

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Karthikeyan Kathirvel <quic_kathirve@xxxxxxxxxxx>

[ Upstream commit 50dc9ce9f80554a88e33b73c30851acf2be36ed3 ]

The maximum number of SSIDs in a for active probe requests is currently
reported as 16 (WLAN_SCAN_PARAMS_MAX_SSID) when registering the driver.
The scan_req_params structure only has the capacity to hold 10 SSIDs.
This leads to a buffer overflow which can be triggered from
wpa_supplicant in userspace. When copying the SSIDs into the
scan_req_params structure in the ath11k_mac_op_hw_scan route, it can
overwrite the extraie pointer.

Firmware supports 16 ssid * 4 bssid, for each ssid 4 bssid combo probe
request will be sent, so totally 64 probe requests supported. So
set both max ssid and bssid to 16 and 4 respectively. Remove the
redundant macros of ssid and bssid.

Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01300-QCAHKSWPL_SILICONZ-1

Signed-off-by: Karthikeyan Kathirvel <quic_kathirve@xxxxxxxxxxx>
Signed-off-by: Kalle Valo <quic_kvalo@xxxxxxxxxxx>
Link: https://lore.kernel.org/r/20220329150221.21907-1-quic_kathirve@xxxxxxxxxxx
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/net/wireless/ath/ath11k/wmi.h | 12 ++----------
 1 file changed, 2 insertions(+), 10 deletions(-)

diff --git a/drivers/net/wireless/ath/ath11k/wmi.h b/drivers/net/wireless/ath/ath11k/wmi.h
index 2f26ec1a8aa3..8173570975e4 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.h
+++ b/drivers/net/wireless/ath/ath11k/wmi.h
@@ -3087,9 +3087,6 @@ enum scan_dwelltime_adaptive_mode {
 	SCAN_DWELL_MODE_STATIC = 4
 };
 
-#define WLAN_SCAN_MAX_NUM_SSID          10
-#define WLAN_SCAN_MAX_NUM_BSSID         10
-
 #define WLAN_SSID_MAX_LEN 32
 
 struct element_info {
@@ -3104,7 +3101,6 @@ struct wlan_ssid {
 
 #define WMI_IE_BITMAP_SIZE             8
 
-#define WMI_SCAN_MAX_NUM_SSID                0x0A
 /* prefix used by scan requestor ids on the host */
 #define WMI_HOST_SCAN_REQUESTOR_ID_PREFIX 0xA000
 
@@ -3112,10 +3108,6 @@ struct wlan_ssid {
 /* host cycles through the lower 12 bits to generate ids */
 #define WMI_HOST_SCAN_REQ_ID_PREFIX 0xA000
 
-#define WLAN_SCAN_PARAMS_MAX_SSID    16
-#define WLAN_SCAN_PARAMS_MAX_BSSID   4
-#define WLAN_SCAN_PARAMS_MAX_IE_LEN  256
-
 /* Values lower than this may be refused by some firmware revisions with a scan
  * completion with a timedout reason.
  */
@@ -3311,8 +3303,8 @@ struct scan_req_params {
 	u32 n_probes;
 	u32 *chan_list;
 	u32 notify_scan_events;
-	struct wlan_ssid ssid[WLAN_SCAN_MAX_NUM_SSID];
-	struct wmi_mac_addr bssid_list[WLAN_SCAN_MAX_NUM_BSSID];
+	struct wlan_ssid ssid[WLAN_SCAN_PARAMS_MAX_SSID];
+	struct wmi_mac_addr bssid_list[WLAN_SCAN_PARAMS_MAX_BSSID];
 	struct element_info extraie;
 	struct element_info htcap;
 	struct element_info vhtcap;
-- 
2.35.1




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux