On Thu, May 26, 2022 at 02:32:14PM +0200, Andrew Lunn wrote: > On Thu, May 26, 2022 at 05:03:47PM +0800, Tan Tee Min wrote: > > This could cause an issue during power up, when PHY is up prior to MAC. > > At this condition, once MAC side SGMII is up, MAC side SGMII wouldn`t > > receive new in-band message from TI PHY with correct link status, speed > > and duplex info. > > > > As suggested by TI, implemented a SW solution here to retrigger SGMII > > Auto-Neg whenever there is a link change. > > Is there a bit in the PHY which reports host side link? There is no > point triggering an AN if there is already link. > > Andrew Thanks for your comment. There is no register bit in TI PHY which reports the SGMII AN link status. But, there is a bit that only reports the SGMII AN completion status. In this case, the PHY side SGMII AN has been already completed prior to MAC is up. So, once MAC side SGMII is up, MAC side SGMII wouldn`t receive any new in-band message from TI PHY. Thanks, Tee Min
