From: Ulf Hansson <ulf.hansson@xxxxxxxxxx> commit ad91619aa9d78ab1c6d4a969c3db68bc331ae76c upstream The INAND_CMD38_ARG_EXT_CSD is a vendor specific EXT_CSD register, which is used to prepare an erase/trim operation. However, it doesn't make sense to use a timeout of 10 minutes while updating the register, which becomes the case when the timeout_ms argument for mmc_switch() is set to zero. Instead, let's use the generic_cmd6_time, as that seems like a reasonable timeout to use for these cases. Signed-off-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx> Link: https://lore.kernel.org/r/20200122142747.5690-3-ulf.hansson@xxxxxxxxxx Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/mmc/core/block.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) --- a/drivers/mmc/core/block.c +++ b/drivers/mmc/core/block.c @@ -1126,7 +1126,7 @@ static void mmc_blk_issue_discard_rq(str card->erase_arg == MMC_TRIM_ARG ? INAND_CMD38_ARG_TRIM : INAND_CMD38_ARG_ERASE, - 0); + card->ext_csd.generic_cmd6_time); } if (!err) err = mmc_erase(card, from, nr, card->erase_arg); @@ -1168,7 +1168,7 @@ retry: arg == MMC_SECURE_TRIM1_ARG ? INAND_CMD38_ARG_SECTRIM1 : INAND_CMD38_ARG_SECERASE, - 0); + card->ext_csd.generic_cmd6_time); if (err) goto out_retry; } @@ -1186,7 +1186,7 @@ retry: err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, INAND_CMD38_ARG_EXT_CSD, INAND_CMD38_ARG_SECTRIM2, - 0); + card->ext_csd.generic_cmd6_time); if (err) goto out_retry; }
