On Wed, May 18, 2022 at 06:34:30PM +0200, Marek Vasut wrote:
> According to Ilitek "231x & ILI251x Programming Guide" Version: 2.30
> "2.1. Power Sequence", "T4 Chip Reset and discharge time" is minimum
> 10ms and "T2 Chip initial time" is maximum 150ms. Adjust the reset
> timings such that T4 is 15ms and T2 is 160ms to fit those figures.
>
> This prevents sporadic touch controller start up failures when some
> systems with at least ILI251x controller boot, without this patch
> the systems sometimes fail to communicate with the touch controller.
>
> Fixes: 201f3c803544c ("Input: ili210x - add reset GPIO support")
> Signed-off-by: Marek Vasut <marex@xxxxxxx>
> Cc: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
> ---
> drivers/input/touchscreen/ili210x.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/input/touchscreen/ili210x.c b/drivers/input/touchscreen/ili210x.c
> index 2bd407d86bae5..131cb648a82ae 100644
> --- a/drivers/input/touchscreen/ili210x.c
> +++ b/drivers/input/touchscreen/ili210x.c
> @@ -951,9 +951,9 @@ static int ili210x_i2c_probe(struct i2c_client *client,
> if (error)
> return error;
>
> - usleep_range(50, 100);
> + msleep(15);
> gpiod_set_value_cansleep(reset_gpio, 0);
> - msleep(100);
> + msleep(160);
> }
>
> priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> --
> 2.35.1
>
<formletter>
This is not the correct way to submit patches for inclusion in the
stable kernel tree. Please read:
https://www.kernel.org/doc/html/latest/process/stable-kernel-rules.html
for how to do this properly.
</formletter>
